Products - Page 16

Edson will be closed Wednesday 12/24 through Friday 12/26 and Thursday 1/1 through Friday 1/2.

Steering hardware, wheels, accessories, electronic mounts, and pumps highlight what Edson has to offer in this complete catalog of products.

Sailboat Steering Systems & Steering Wheels

Sailboat Pedestal & Cockpit Accessories

Electronics Mounting Systems

Marine Accessories for Sailboats

Marine Manual Pumps for Power Boats & Sailboats

Bronze Compact Manual Lever-Action Vertical Mount, 18 GPM Pump, 1.5" Inlet & Discharge (256BR-150)

MSRP:

Was:

Now: $1,103.00

Add to Cart
Stainless Take-Up Eye - 3/8-inch Bolt

MSRP:

Was:

Now: $57.00

Add to Cart
Stainless Wire Rope Clamp - 3/16-inch Wire Size

MSRP:

Was:

Now: $13.00

Add to Cart
Stainless Wire Rope Clamp - 1/4-inch Wire Size

MSRP:

Was:

Now: $14.00

Add to Cart
Stainless Wire Rope Clamp - 5/16-inch Wire Size

MSRP:

Was:

Now: $19.00

Add to Cart
Mounting Plate - FLIR/Raymarine (YR:2017 & NEWER - M-Series fixed Mount Pan/Tilt Thermal Camera) with Light arm option (68712)

MSRP:

Was:

Now: $163.00

Add to Cart
Standard Vision Pole Mount 2-3/8" dia. x 90"

MSRP:

Was:

Now: $877.00
Standard Vision Pole Mount 2-3/8" dia. x 90" (POLE ONLY)

MSRP:

Was:

Now: $371.00
Diaphragm Pump Spares Kit - Nitrile - For Models 217, 220, 254, 256 & 258 Pumps (114N-18-220)

MSRP:

Was:

Now: $188.00

Add to Cart
GPS Mount with Light Extension Adapter

MSRP:

Was:

Now: $211.00

Add to Cart
One-Step™ Boarding Step with Line

MSRP:

Was:

Now: $409.00

Add to Cart
Mounting Plate - FLIR (M-364 Riser) (10.118" Dia.) (68840)

MSRP:

Was:

Now: $163.00

Add to Cart
Standard Vision Pole Mount 2-3/8" dia. x 138" (POLE ONLY)

MSRP:

Was:

Now: $499.00
Stainless Antenna Extension - 3"

MSRP:

Was:

Now: $107.00

Add to Cart
Mounting Plate - FLIR (M-Series) (10.625" Dia.) (68620)

MSRP:

Was:

Now: $163.00

Add to Cart
One-Step™ Boarding Step (with out lines and clips)

MSRP:

Was:

Now: $362.00

Add to Cart
Thru-Deck Fiberglass Tube for 2-3/8" Radar Pole

MSRP:

Was:

Now: $368.00

Add to Cart
Stainless Antenna Extension - 13"

MSRP:

Was:

Now: $131.00

Add to Cart
Side-Mount Outboard Engine Bracket - Small

MSRP:

Was:

Now: $677.00

Add to Cart
Base Flange Mount 2-3/8" Mast

MSRP:

Was:

Now: $131.00

Add to Cart
Mounting Plate - FLIR Navigator II (68700)

MSRP:

Was:

Now: $163.00

Add to Cart
Side-Mount Outboard Engine Bracket - Large

MSRP:

Was:

Now: $708.00

Add to Cart
Bronze Outboard Motor Brackets - Angled Transom

MSRP:

Was:

Now: $581.00

Add to Cart
Replacement Rubber Bumper for One-Step™ Boarding Step (960-A-1261)

MSRP:

Was:

Now: $10.00

Add to Cart

Bronze Compact Manual Lever-Action Vertical Mount, 18 GPM Pump, 1.5" Inlet & Discharge (256BR-150)

Model 256 Lever Action Side Inlet Pumps with a Stainless Steel handle and pump lever oriented for vertical operation. Designed for easy installation on a vertical surface such as a wall or vehicle bulkhead. Size 18 Pump - Bronze - 1.5"...

MSRP:

Was:

Now: $1,103.00

Add to Cart
Stainless Take-Up Eye - 3/8-inch Bolt

3/8" diameter threads. For use with 1/4" and 5/16" diameter steering wire. Edson's Stainless Take-Up Eye - (618-0-312) Key Features: Diameter of threads 3/8-inch | 9.53 mm Dia. Bolt Wire Rope acceptance 1/4-inch | 6.4...

MSRP:

Was:

Now: $57.00

Add to Cart
Stainless Wire Rope Clamp - 3/16-inch Wire Size

Edson’s Stainless Wire Rope Clamps are used to secure the end of the wire rope after it goes through the Take-Up Eye on Quadrants and Drive Wheels. Two each are required for each take-up eye, or four total for a steering installation. Edson's...

MSRP:

Was:

Now: $13.00

Add to Cart
Stainless Wire Rope Clamp - 1/4-inch Wire Size

Edson’s Stainless Wire Rope Clamps are used to secure the end of the wire rope after it goes through the Take-Up Eye on Quadrants and Drive Wheels. Two each are required for each take-up eye, or four total for a steering installation. Edson's...

MSRP:

Was:

Now: $14.00

Add to Cart
Stainless Wire Rope Clamp - 5/16-inch Wire Size

Edson’s Stainless Wire Rope Clamps are used to secure the end of the wire rope after it goes through the Take-Up Eye on Quadrants and Drive Wheels. Two each are required for each take-up eye, or four total for a steering installation. Edson's...

MSRP:

Was:

Now: $19.00

Add to Cart
Mounting Plate - FLIR/Raymarine (YR:2017 & NEWER - M-Series fixed Mount Pan/Tilt Thermal Camera) with Light arm option (68712)

With Edson's Vision Series Mounting System once you have selected the mount you want to install your electronics to you must select the corresponding plate that has the correct bolt pattern for your electronics...

MSRP:

Was:

Now: $163.00

Add to Cart
Standard Vision Pole Mount 2-3/8" dia. x 90"

Edson RADAR POLES are a convenient way to mount your radar antenna as well as many other navigation and communications antenna in one location. Built of lightweight marine-grade aluminum, the EDSON VISION SERIES POLE SYSTEM can be mounted to...

MSRP:

Was:

Now: $877.00
Standard Vision Pole Mount 2-3/8" dia. x 90" (POLE ONLY)

Edson RADAR POLES are a convenient way to mount your radar antenna as well as many other navigation and communications antenna in one location. Built of lightweight marine-grade aluminum, the EDSON VISION SERIES POLE SYSTEM can be mounted to...

MSRP:

Was:

Now: $371.00
Diaphragm Pump Spares Kit - Nitrile - For Models 217, 220, 254, 256 & 258 Pumps (114N-18-220)

Edson's 114N-18-220 Nitrile Spares Kit includes (1) 113N-18 Diaphragm, (2) 160-A-1207 Check Valves and (2) 160-A-1253 Sealing Washers, the replacement elastomer parts for Edson Models 217, 254, 256 and 258 18-GPM Manual Pumps and 220...

MSRP:

Was:

Now: $188.00

Add to Cart
GPS Mount with Light Extension Adapter

Edson's 67400 GPS Mount with Light Extension Adapter is specifically designed for Edson's Vision Series Light Arms. Add a GPS antenna to your Light Arm with the “Edson GPS Mount” (powder coated stainless steel)and has an...

MSRP:

Was:

Now: $211.00

Add to Cart
One-Step™ Boarding Step with Line

If the deck of your boat seems to be getting higher and your dinghy seems to be getting lower, get Edson’s “One-Step™ Boarding Step”. Edson makes getting onboard safer and easier. Cast in aluminum and coated with durable,...

MSRP:

Was:

Now: $409.00

Add to Cart
Mounting Plate - FLIR (M-364 Riser) (10.118" Dia.) (68840)

With Edson's Vision Series Mounting System once you have selected the mount you want to install your electronics to you must select the corresponding plate that has the correct bolt pattern for your electronics. Edson's 68840 Vision...

MSRP:

Was:

Now: $163.00

Add to Cart
Standard Vision Pole Mount 2-3/8" dia. x 138" (POLE ONLY)

Edson RADAR POLES are a convenient way to mount your radar antenna as well as many other navigation and communications antenna in one location. Built of lightweight marine-grade aluminum, the EDSON VISION SERIES POLE SYSTEM can be mounted to...

MSRP:

Was:

Now: $499.00
Stainless Antenna Extension - 3"

Edson's 980-3-100 3" Stainless Antenna Extension Designed to raise Loran or GPS Antennas above the Radar beam or to provide a mounting adapter for VHF antennas. Ideal of Mounting to Edson's Antenna Mounting Wings. Made of...

MSRP:

Was:

Now: $107.00

Add to Cart
Mounting Plate - FLIR (M-Series) (10.625" Dia.) (68620)

With Edson's Vision Series Mounting System once you have selected the mount you want to install your electronics to you must select the corresponding plate that has the correct bolt pattern for your electronics. Edson's 68620 Vision...

MSRP:

Was:

Now: $163.00

Add to Cart
One-Step™ Boarding Step (with out lines and clips)

If the deck of your boat seems to be getting higher and your dinghy seems to be getting lower, get Edson’s One-Step™ boarding step. The One-Step makes getting onboard safer and easier. Cast in aluminum and coated with durable, glossy-white...

MSRP:

Was:

Now: $362.00

Add to Cart
Thru-Deck Fiberglass Tube for 2-3/8" Radar Pole

The most popular and versatile mounting system is the Thru-Deck Tube Mount. A heavy-duty fiberglass tube is simply fitted through a hole in the deck and fiberglassed to the underside of the deck and the hull. The mast slides into the tube and is pinned...

MSRP:

Was:

Now: $368.00

Add to Cart
Stainless Antenna Extension - 13"

Edson's 980-13-100 13" Stainless Antenna Extension Designed to raise Loran or GPS Antennas above the Radar beam or to provide a mounting adapter for VHF antennas. Ideal of Mounting to Edson's Antenna Mounting Wings. Made of...

MSRP:

Was:

Now: $131.00

Add to Cart
Side-Mount Outboard Engine Bracket - Small

Edson's new Side-Mount Outboard Engine Brackets are designed to secure small electric or small gasoline-powered outboard motors (not to exceed 2hp) directly to the side of small sailing vessels. Engineered for both port and starboard sides of the boat...

MSRP:

Was:

Now: $677.00

Add to Cart
Base Flange Mount 2-3/8" Mast

Another system for thru-deck mounting uses a pair of specially designed Mounting Flanges. Edson's 978-23-35B Base Flange Mount for 2-3/8" Radar Mast has a shoulder to support the bottom of the mast, along with using Edson's bored...

MSRP:

Was:

Now: $131.00

Add to Cart
Mounting Plate - FLIR Navigator II (68700)

With Edson's Vision Series Mounting System once you have selected the mount you want to install your electronics to you must select the corresponding plate that has the correct bolt pattern for your electronics. Edson's 68700 Vision...

MSRP:

Was:

Now: $163.00

Add to Cart
Side-Mount Outboard Engine Bracket - Large

Edson's new Side-Mount Outboard Engine Brackets are designed to secure small electric and gasoline-powered outboard motors directly to the side of small sailing vessels. Engineered for both port and starboard sides of the boat. It provides a removable...

MSRP:

Was:

Now: $708.00

Add to Cart
Bronze Outboard Motor Brackets - Angled Transom

Edson’s Bronze Outboard Brackets are designed as an engine mount for use on dinghies and small sailboats. The mounting plate is permanently fastened to the boat’s transom. The bracket slides into the plate and is held in place by two...

MSRP:

Was:

Now: $581.00

Add to Cart
Replacement Rubber Bumper for One-Step™ Boarding Step (960-A-1261)

Edson’s “One-Step™ Boarding Step” makes getting onboard safer and easier. But over time the Rubber Bumbers on your One-Step™ Boarding Step wear out and need to be replaced. Order the Replacement Rubber Bumper and keep...

MSRP:

Was:

Now: $10.00

Add to Cart

Shop