Service Parts

Flanged Bushing (Diamond Series Wheels Only)

Used on Diamond Series wheel where for the bolts that mount the wheel onto the flange. 

Double Flat Sheave Assembly - 6" Sheaves

Double flat sheave housing with two 6" sheaves. Ideal for 1/4" wire and 6mm Dyneema.  If you are replacing a worn sheave pin in an older double flat housing please call Edson for availability of double flat sheave pins. (508) 995-9711

Superlube 1/2oz Tube

CDi Side Brake Collar - Bronze

CDi Brake Collar - Bronze. For CDi's with side brakes ONLY. A replacement for worn out brake collars found on CDi pedestals.  Machined to fit the downtube for even clamping force around it.  This is NOT compatible for CDi pedestals that use a...

Pedestal Bolts - Flats Kit

4 SS bolts - 1/2-13 x 4" flat head with nuts and Tefgel. Only for Classic Edson pedestals made prior to 1987. 1987 and after uses a hex head aluminum bolt. 

Double Flat Sheave Assembly - 4" Sheaves

Double flat sheave housing with two 4" sheaves. Ideal for 3/16" wire and 6mm Dyneema.  If you are replacing a worn sheave pin in an older double flat housing please call Edson for availabilty of double flat sheave pins. (508) 995-9711

Dyneema and Chain Kit

Many boat owners prefer Dyneema line over 7x19 wire since it runs well over sheaves, is unaffected by salt, is much stronger than wire of similar diameter, and is often much easier to install in tight quarters. Instead of cable clamps which can be hard...

Sheave Pins for 4" Sheaves - Stainless Steel (960-A-1315)

In the early 1990s Edson upgraded the materials of sheave pins from brass to stainless steel. Brass pins were known to wear down over time creating complications in steering systems. For any boats made prior to that time period, please check your sheaves...

Sheave Pins for 6" Sheaves - Stainless Steel (960-A-1301)

In the early 1990s Edson upgraded the materials of sheave pins from brass to stainless steel. Brass pins were known to wear down over time creating complications in steering systems. For any boats made prior to that time period, please check your sheaves...

Brake Sleeve, Throttle/Engine Controls Sleeve (960-A-125)

This Delrin bushing is a replacement for worn or broken bushings on your 335 Edson pedestal with side brake, and on Edson engine controls. Used on the throttle and clutch lever n the 870ST-45 and 870ST-6. Used only on the throttle lever on the...

Chain & Wire Kit - 2S2B9 (77110)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

Chain & Wire Kit - 2S25B13 (77120)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials. One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink plastic...

420 Bulkhead Steerer Rebuild Kit (314-420)

Bring new parts to your steering system with the Steerer Rebuild Kit. Edson's #314-420 Steerer Rebuild Kit replaces all of the important component parts that make up 420 Bulkhead Steerers.   #314-420 Pedestal Maintenance Kit includes: (2)...

Chain & Wire Kit - 2S15B7 (77100)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

Chain & Wire Kit - 2B25D13 (77208)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

Chain & Wire Kit - 2S25B22 (77122)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

Tef45 - 2 Gram Capsule (960-A-1466-2G)

THE ULTIMATE IN CORROSION PROTECTION. Protects, Lubricates, stops corrosion, prevents seizing and galling.  Won’t wash away in fresh or salt water or detergents.  MareLube™ TEF45™ is designed specifically for high...

Brake Maintenance Kit 316-689)

Just like your car, your boat’s wheel brake needs periodic relining. This kit includes all you need to make your brake work like new again. Compatible with 335, 400, and 410 pedestals with a side mount brake.    Click Here to see the How...

3/16" Woodruff Key - Tapered Shafts (684-187W)

Edson's 3/16" Woodruff Key is designed for Edson's Tapered Shafts or specifically for Edson's 336 Pedestal Through Shaft Brake Model.

Transom Boot (960-B-446)

Edson's 960-B-446 Transom Boot is apart of Edson's Transom Hung Rudder Steering System.  Ideal for boats with Transom Hung Rudders up to 27' (8.5m).

2" Vertical Rudder Stop (862-2)

Edson's 2" Vertical Rudder Stops are designed to limit the swing of the rudder.  Attached directly to an Edson Radial Drive Wheel or Edson's Pull-Pull Conduit Bracket to limit the swing of the Quadrant.   Bolts used are 3/8-16 x 1" long to...

3" Aluminum Hex Head Pedestal Bolt (646-3HEX)

Since 1987, all Edson Pedestals use the exclusive Edson Hex Head Aluminum Bolts. With this improvement they lock in place and require only one person to tighten them. They fit flush with the base and the aluminum alloy is the same as the base thus...

1/4" Square Wheel Key - Straight Shafts (684-250W)

Edson's 1/4" Square Wheel Key is designed for Edson's Straight Shafts for 335 Pedestals (Side Brake Model) & Edson's 336 Pedestal (Through Shaft Brake Model).

3in Bronze Sheave (ONLY)

Edson’s Sheaves may be the answer in many areas of custom boat building, not only for steering but also for centerboards, custom deck hardware, or remote actuators, such as emergency shut off valves and CO2 systems. Great care should be...