Products - Page 5

Steering hardware, wheels, accessories, electronic mounts, and pumps highlight what Edson has to offer in this complete catalog of products.

Sailboat Steering Systems & Steering Wheels

Sailboat Pedestal & Cockpit Accessories

Electronics Mounting Systems

Marine Accessories for Sailboats

Marine Manual Pumps for Power Boats & Sailboats

Chain & Wire Kit - 2S15B9 (77103)

MSRP:

Was:

Now: $345.00

Add to Cart
408 Needle Bearing Shelf Steerer - 15 Tooth Sprocket - Tapered Shaft (With Brake)

MSRP:

Was:

Now: $1,288.00
418 Bulkhead Steerer - 15 Tooth Sprocket - Tapered Shaft (With Brake)

MSRP:

Was:

Now: $1,190.00
420 Bulkhead Steerer - 15 Tooth Sprocket - Tapered Shaft (With Brake)

MSRP:

Was:

Now: $1,026.00
336 Classic Series Pedestal - 11 Tooth Sprocket - Straight Shaft

MSRP:

Was:

Now: $2,356.00
Vision II Series - 11 Tooth Sprocket - Tapered Shaft
Shelf Steerer (408) Rebuild Kit (314-408)

MSRP:

Was:

Now: $127.00

Add to Cart
Wheel Shaft Washer (960-A-729)

MSRP:

Was:

Now: $4.00

Add to Cart
Snap Ring, Heavy Duty (sold individually) 960-A-1870

MSRP:

Was:

Now: $5.00

Add to Cart
18-40inch Stainless Steel Destroyer Wheel - 3/4-inch Tapered Hub

MSRP:

Was:

Now: $864.00 - $1,196.00

Choose Options
Vision II Pedestal Rebuild Kit (314-476)

MSRP:

Was:

Now: $156.00

Add to Cart
Compass Cover

MSRP:

Was:

Now: $59.00

Add to Cart
Pedestal Guard Pipe Only - 1-1/8" - Offset 58"

MSRP:

Was:

Now: $470.00

Add to Cart
Pedestal Guard Kit - 58" Offset - 6-7/8" Top Plate

MSRP:

Was:

Now: $614.00

Add to Cart
Engine Control Cable Clamp Nylon

MSRP:

Was:

Now: $37.00

Add to Cart
Replacement Black Clutch Knob

MSRP:

Was:

Now: $16.00

Add to Cart
Single Lever Engine Control for Edson Pedestal #336 with 58" Angled Guard

MSRP:

Was:

Now: $1,663.00

Add to Cart
Engine Control - Side Shift

MSRP:

Was:

Now: $579.00

Add to Cart
Hardware Kit for Drop Leaf & Luncheon Table for Consoles

MSRP:

Was:

Now: $373.00

Add to Cart
Storage Rail Mount - Tapered Hub (Device Only)

MSRP:

Was:

Now: $174.00

Add to Cart
Pedestal Rebuild Kit (314-335)

MSRP:

Was:

Now: $131.00

Add to Cart
6" Aluminum Hex Head Pedestal Bolt (646-6HEX)

MSRP:

Was:

Now: $13.00

Add to Cart
Snap Ring (sold individually) (960-A-66)

MSRP:

Was:

Now: $6.00

Add to Cart
6in Aluminum Sheave (ONLY)

MSRP:

Was:

Now: $124.00

Add to Cart

Chain & Wire Kit - 2S15B9 (77103)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $345.00

Add to Cart
408 Needle Bearing Shelf Steerer - 15 Tooth Sprocket - Tapered Shaft (With Brake)

Edson’s Needle Bearing Shelf Steerers are designed to provide precise steering control for larger boats. They are highly desirable due to their dependability, super sensitive “feel” and friction-free performance. Designed to be...

MSRP:

Was:

Now: $1,288.00
418 Bulkhead Steerer - 15 Tooth Sprocket - Tapered Shaft (With Brake)

Edson's 418 Bulkhead Steerer is lightweight, versatile and rugged. For use on performance and cruising boats alike. Edson’s Bulkhead Steerers feature Stainless Steel Needle Bearings to reduce friction, a Thru-Shaft Wheel Brake, all stainless...

MSRP:

Was:

Now: $1,190.00
420 Bulkhead Steerer - 15 Tooth Sprocket - Tapered Shaft (With Brake)

Designed for boats with built-in pedestal consoles, Edson’s new Bulkhead Steerer features easy installation, Edson’s super-sensitive Stainless Needle Bearings, a Thru-Shaft Wheel Brake, all-stainless construction and the ability to...

MSRP:

Was:

Now: $1,026.00
336 Classic Series Pedestal - 11 Tooth Sprocket - Straight Shaft

Edson's Classic Series Pedestals allow for great space within the cockpit! Edson's #336-5-211S Pedestal has a 6-7/8" top diameter and features a convenient thru-shaft brake. The 336 pedestal is ideal for boats from 22' to 42' (6.7m - 12.8m). Edson's...

MSRP:

Was:

Now: $2,356.00
Vision II Series - 11 Tooth Sprocket - Tapered Shaft

Edson's Vision II pedestal has been discontinued and replaced with our new Quest Pedestal. This page is for information purposes only. Edson's Vision II Pedestal #476B-211T comes complete with: Tapered 1" wheel shaft with 1/4" key for wheels with...
Shelf Steerer (408) Rebuild Kit (314-408)

Maintain your Edson 408 Shelf Steerer with a rebuild kit that includes all the replaceable components along the wheel shaft, including needle bearings. The steerer shaft needle bearings have a +/- 20 year lifespan assuming proper maintenance, and worn...

MSRP:

Was:

Now: $127.00

Add to Cart
Wheel Shaft Washer (960-A-729)

Found on 1" straight wheel shafts to prevent the wheel from sliding forward placed between the wheel hub and heavy duty snap ring.

MSRP:

Was:

Now: $4.00

Add to Cart
Snap Ring, Heavy Duty (sold individually) 960-A-1870

Edson's heavy duty snap ring (960-A-1870) is designed for Edson pedestals. Found on 1" straight wheel shafts to prevent the wheel from sliding forward with a washer between the snap ring and the wheel hub.

MSRP:

Was:

Now: $5.00

Add to Cart
18-40inch Stainless Steel Destroyer Wheel - 3/4-inch Tapered Hub

The classic Edson Destroyer™ Wheel will add distinction and value to any boat. Edson's 1750ST is 18"-40"(558mm-1016mm) in diameter wheel with a standard 3/4" power boat taper, precision machined to ensure an exact fit to your steering shaft...

MSRP:

Was:

Now: $864.00 - $1,196.00

Choose Options
Vision II Pedestal Rebuild Kit (314-476)

Bring new life to your Edson Vision II Pedestal (#476) with this complete Rebuild Kit. Edson's #476 Pedestal Rebuild Kit replaces all of the important moving parts that will make your Pedestal run smoothly again. #476 Pedestal Maintenance Kit...

MSRP:

Was:

Now: $156.00

Add to Cart
Compass Cover

Edson’s Compass and Instrument Cover protects your compass or pod mounted instruments. The cover is made of sun-resistant white vinyl laminate with a Velcro tie.COMPASS AND PEDESTAL GUARD NOT INCLUDED

MSRP:

Was:

Now: $59.00

Add to Cart
Pedestal Guard Pipe Only - 1-1/8" - Offset 58"

Replacement Pedestal Guard Pipe for 58" Tall, Offset, 1-1/8" diameter guard tubing only. This version is for Edson #335, 336 and 337 Pedestals & #400, 402, 464 CDi Pedestals Does not include Top Plate or Mounting Feet.

MSRP:

Was:

Now: $470.00

Add to Cart
Pedestal Guard Kit - 58" Offset - 6-7/8" Top Plate

Edson’s most versatile Guard, the Offset Guard provides you with better instrument visibility because we have moved the instruments forward by 7” (124.5 cm).Edson Pedestal Guard Kit includes Stainless Guard Pipe, Top Plate and Mounting Feet...

MSRP:

Was:

Now: $614.00

Add to Cart
Engine Control Cable Clamp Nylon

Edson's Nylon Engine Control Cable Clamp #960-A-969 is for 5/16” 33 Series Cable (Use with #816 & #870 Controls).

MSRP:

Was:

Now: $37.00

Add to Cart
Replacement Black Clutch Knob

Black plastic replacement clutch handle for horizontal shift levers. Stainless shaft not included. Secure with epoxy.

MSRP:

Was:

Now: $16.00

Add to Cart
Single Lever Engine Control for Edson Pedestal #336 with 58" Angled Guard

Edson’s Single Lever Engine Control for Edson Pedestal #336 with 58" Angled Guard provides simple, safe, one-handed operation while maneuvering your boat under power. Mounted on the Pedestal with the 58" Angled 1-1⁄8” diameter...

MSRP:

Was:

Now: $1,663.00

Add to Cart
Engine Control - Side Shift

Edson Clutch and Throttle Control is designed for transmissions that go into reverse when the cable is extended at the pedestal end. Also for harder to shift transmissions. Only for transmissions that specify 33 Series (Edson #734) Control...

MSRP:

Was:

Now: $579.00

Add to Cart
Hardware Kit for Drop Leaf & Luncheon Table for Consoles

Edson’s “Hardware Only” Kits are for the handyman who wishes to design and build his own cockpit table or accessories based on Edson’s tried and true designs. All kits are complete with instructions and stainless hardware...

MSRP:

Was:

Now: $373.00

Add to Cart
Storage Rail Mount - Tapered Hub (Device Only)

Make more room in your cockpit when you’re not sailing! Enjoy a large wheel when sailing but it takes up too much room in the cockpit when you are at anchor or at the dock? Take your wheel off and store it out of the way with Edson’s Wheel...

MSRP:

Was:

Now: $174.00

Add to Cart
Pedestal Rebuild Kit (314-335)

Bring new life to an older but still good Edson #335 & #336 Pedestal with this complete Rebuild Kit. Edson's #314-335 Pedestal Rebuild Kit replaces all of the important moving parts that will make your pedestal run smoothly again. The...

MSRP:

Was:

Now: $131.00

Add to Cart
6" Aluminum Hex Head Pedestal Bolt (646-6HEX)

Since 1987, all Edson Pedestals use the exclusive Edson Hex Head Aluminum Bolts. With this improvement they lock in place and require only one person to tighten them. They fit flush with the base and the aluminum alloy is the same as the base thus...

MSRP:

Was:

Now: $13.00

Add to Cart
Snap Ring (sold individually) (960-A-66)

Edson's heavy Duty Snap Ring (960-A-660) is designed for Edson's 335 Pedestals (Side Brake Model) & Edson's 336 Pedestal (Through Shaft Brake Model).

MSRP:

Was:

Now: $6.00

Add to Cart
6in Aluminum Sheave (ONLY)

Edson’s Sheaves may be the answer in many areas of custom boat building, not only for steering but also for centerboards, custom deck hardware, or remote actuators, such as emergency shut off valves and CO2 systems. Great care should be...

MSRP:

Was:

Now: $124.00

Add to Cart

Shop