Shop

Engine Control Sleeve for Clutch on 816ST-45

Delrin bushing to replace a worn or broken bushing on the internal clutch lever assembly for 816ST-45 engine controls.   ID = 1"

Internal Clutch Lever Assembly (For 816ST-45 Engine Controls)

Internal Cutch Lever Assembly to replace parts in 816ST-45 engine controls. Includes bushing and fasteners Hardware Clutch set screw (bottom side): 8-32 x 1/2" R.H.

Pumpout Nozzle with Splash Guard - Female Quick Clamp 1.5" (27225)

Pumping out a boat's holding tank has now been made easier and safer with Edson's Universal Pumpout Nozzle with Splash Guard. This pumpout nozzle is attached to a female 1.5" quick clamp (camlock) adapter so it can be interchanged with other deck...

Pumpout Nozzle with Splash Guard - Male Quick Clamp 1.5" (27220)

Former product 272QC-150-SG.   Pumping out a boat's holding tank has now been made easier and safer with Edson's Universal Pumpout Nozzle with Splash Guard. This pumpout nozzle is attached to a male 1.5" quick clamp (camlock) adapter so it can be...

Pumpout Nozzle with Splash Guard - Male Quick Clamp 1.5" 272QC-150-SG (Updated Part is 27220)

This product has been updated, please see part 27220.   Pumping out a boat's holding tank has now been made easier and safer with Edson's Universal Pumpout Nozzle with Splash Guard. This pumpout nozzle is attached to a male 1.5" quick clamp...

Pumpout Nozzle with Splash Guard X 1.5" Hose Barb(27222)

Pumping out a boat's holding tank has now been made easier and safer with Edson's Universal Pumpout Nozzle with Splash Guard. This pumpout nozzle comes fixed to a 1½" Hose Barb so it can be permanently attached to a 1½" ID hose. The suction...

Pumpout Nozzle with Splash Guard X 1.5" Male NPT (27221)

Pumping out a boat's holding tank has now been made easier and safer with Edson's Universal Pumpout Nozzle with Splash Guard. This pumpout nozzle comes attached to a 1.5" Male NPT Close Nipple so it can be permanently screwed into a 1.5" ball valve. The...

1.25" Waste Deck Fitting Adapter (273-125)

This pumpout adapter provides the most secure connection of pumpout hose to boat by using a quick clamp adapter (1.5" Male Quick Clamp X 1.25" Male NPT) and flat sealing washers. The male thread end of an adapter is screwed into the boat waste deck...

1.5" Waste Deck Fitting Adapter (273-150)

This pumpout adapter provides the most secure connection of pumpout hose to boat by using a quick clamp adapter (1.5" Male Quick Clamp X 1.5" Male NPT) and flat sealing washers. The male thread end of an adapter is screwed into the boat waste deck...

18" Aluminum Handle with Grip (3/4" dia.) (160-A-1013AL)

This 3/4" diameter solid Aluminum handle is designed to fit Edson's manual diaphragm pumps. A ergonomic grip and 18" length make it comfortable to use.   Comes standard with 217, 254, 256, and 258 pumps.

32" Stainless Handle with Grip (3/4" dia.) (160-A-41ST)

This 3/4" diameter solid Stainless Steel handle is designed to fit Edson's manual diaphragm pumps. A ergonomic grip and 32" length make it comfortable to use. Comes standard with 117, 165-18, 165-30, 554, 557, and 638 pumps.  

Foot Valve - Bronze With Strainer & Nitrile Check - 1.5" FNPT (130N-150)

Edson's Foot Valve w/ bronze strainer and Nitrile check valve keeps debris and stones out of your pump while maintaining a prime in the suction line. It come equipped with mounting studs on the strainer so it can be fixed for permanent installations...

Foot Valve - Bronze With Strainer & Nitrile Check - 2" FNPT (130N-200)

Edson's Foot Valve w/ bronze strainer and Nitrile check valve keeps debris and stones out of your pump while maintaining a prime in the suction line. It come equipped with mounting studs on the strainer so it can be fixed for permanent installations...

Strainer - Shatterproof Bronze - 1.5" FNPT (111BS-150)

The Edson Shatterproof Bronze Strainer is used to prevent clogging of a suction hose, pipe and pump. The resilience, corrosive resistance and non-sparking character of marine grade bronze will provide extended life over aluminum, cast steel or plastic...

Strainer - Shatterproof Bronze - 2" FNPT (111BS-200)

The Edson Shatterproof Bronze Strainer is used to prevent clogging of a suction hose, pipe and pump. The resilience, corrosive resistance and non-sparking character of marine grade bronze will provide extended life over aluminum, cast steel or plastic...

Bushing for Pedestal Guards and Rail Mounts

Edson's Replacement Delrin Bushings are used to adapt your pedestal guard and rail mount accessories to your rails. Most of our pedestal guard and rail mount accessories have an opening of 1-1/4" and come with these bushings so they can be adapted to...

Flanged Bushing (Diamond Series Wheels Only)

Used on Diamond Series wheel where for the bolts that mount the wheel onto the flange. 

Superlube 1/2oz Tube

CDi Side Brake Collar - Bronze

CDi Brake Collar - Bronze. For CDi's with side brakes ONLY. A replacement for worn out brake collars found on CDi pedestals.  Machined to fit the downtube for even clamping force around it.  This is NOT compatible for CDi pedestals that use a...

Pedestal Bolts - Flats Kit

4 SS bolts - 1/2-13 x 4" flat head with nuts and Tefgel. Only for Classic Edson pedestals made prior to 1987. 1987 and after uses a hex head aluminum bolt. 

Bi Spoke Destroyer Wheel - Tapered Hub

Bi-spoke stainless steel destroyer wheel with leather wrap. This wheel is in brand new condition with leather still wrapped in plastic. Comes with a custom machined wheel nut that tightens with a winch handle.  Diameter 60". Call 508-995-9711 to...

Leather wrapped Destroyer Wheel - Straight Hub

Leather wrapped stainless steel destroyer wheel with a 1" straight hub. Some marks and blemishes. 36" diameter.

Leather wrapped Destroyer Wheel - Tapered Hub

Leather wrapped wheel stainless steel destroyer wheel.Some markes and blemishes, and aged leather.  40" diameter.

Destroyer Wheel - Tapered

Stainless Steel Destroyer Wheel with tapered hub for sailboats. Some marks and blemishes 26" Diameter.