null

Edson is Closed July 4th and 5th. Happy Independence Day!

Edson is closing at 1pm EST today 07/03

Service Parts

Here you will find Edson sailboat steering hardware, which includes chain & kire kits, pull-pull conduit steering, chain sprockets and much more. For more information about which products are right for your application, please see our support section for boat-specific data sheets, how-to videos and other helpful resources. Our blog section contains many helpful articles, including an in-depth discussion of achieving correct steering cable tension.




  • In-Line Conduit Greaser - for 853-312 Conduit

    In-Line Conduit Greaser - for 853-312 Conduit

    Edson’s In-Line Conduit Greasers are a simple, efficient way to lubricate your conduit. One should be installed in an accessible area of straight conduit as close to the middle of each run as possible - preferably every 3’-5’ where...

    $155.00
  • Internal Conduit Bracket Internal Conduit Bracket

    Internal Conduit Bracket

    Internal Conduit Bracket mounts inside the pedestal column, allowing the conduit to hug the bottom of the cockpit floor.  For ease of installation and maintenance, it is held in position by the pedestal mounting bolts.  Edson’s #868-2...

    $139.00
  • Conduit End Fitting for 3/4" Conduit

    Conduit End Fitting for 3/4" Conduit

    Edson’s #854-250 Conduit End Fittings are designed to fit Edson's #853-250 3/4" Conduit. Two fittings are required for each length of conduit. #854-250 fittings are molded in white Celcon and have an end fitting thread size of ...

    $48.00
  • Chain & Wire Kit - 2S15B22 (77107) Chain & Wire Kit - 2S15B22 (77107) Chain & Wire Kit - 2S15B22 (77107) Chain & Wire Kit - 2S15B22 (77107) Chain & Wire Kit - 2S15B22 (77107)

    Chain & Wire Kit - 2S15B22 (77107)

    Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

    $382.00
  • Needle Bearing 1" (960-A-140-1)

    Needle Bearing 1" (960-A-140-1)

    Edson's Needle Bearing (960-A-140-1) is used in different steerers like the 418 and 420 bulkhead steerers.  (Sold Individually) Specifications: Needle Bearing 1" long – Stainless Fits 1” Shafts

    $60.00
  • Brake Knob & Shaft Assembly for #420 Steerers

    Brake Knob & Shaft Assembly for #420 Steerers

    For #420 Steerers with a Through Shaft Brake For Standard A=1-5/8" with standard Edson Destroyer Wheel. If you do not have an Edson Destroyer Wheel and your wheel hub is thicker than 1" please contact Edson's customer service team at info@edsonintl...

    $143.00
  • Chain & Wire Kit - 2S2B7 (77108) Chain & Wire Kit - 2S2B7 (77108)

    Chain & Wire Kit - 2S2B7 (77108)

    Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials. One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink plastic...

    $299.00
  • Needle Bearing 1-1/8" (960-A-140-1.1)

    Needle Bearing 1-1/8" (960-A-140-1.1)

    Edson's Needle Bearing (960-A-140-1.1) is designed for Edson's 335 Pedestals (Side Brake Model) & Edson's 336 Pedestal (Through Shaft Brake Model). (Sold Individually) Specifications: Needle Bearing 1-1/8" long – Stainless...

    $58.00
  • 8" Aluminum Sheave with Needle Bearings (ONLY)

    8" Aluminum Sheave with Needle Bearings (ONLY)

    Edson’s Sheaves may be the answer in many areas of custom boat building, not only for steering but also for centerboards, custom deck hardware, or remote actuators, such as emergency shut off valves and CO2 systems. Great care should be...

    $344.00
  • Flat Bronze Sheave Assembly - 6" Aluminum Sheave

    Flat Bronze Sheave Assembly - 6" Aluminum Sheave

    Edson’s Flat Sheave Assembly will allow you to turn steering cable around a sheave in tight areas where vertical assemblies normally wouldn't fit. Constructed of anodized Aluminum sheaves and a Bronze housing, it is designed to be...

    $351.00
  • Single Upright Aluminum Sheave Assembly - 12" Sheave

    Single Upright Aluminum Sheave Assembly - 12" Sheave

    Edson’s Single Upright Aluminum Sheave Assembly with a 12" Sheave are specially designed for use in wire rope steering systems for sailboats. The Aluminum Sheaves are ideal for the performance boat that requires sensitive, lightweight steering...

    $1,495.00
  • Bronze Rudder Post Stuffing Box - 1.375" ID Bronze Rudder Post Stuffing Box - 1.375" ID Bronze Rudder Post Stuffing Box - 1.375" ID

    Bronze Rudder Post Stuffing Box - 1.375" ID

    Edson's Rudder Post Stuffing Box combines a rudder post bearing with an above-the-waterline stuffing box for. We recommend fiberglassing the stuffing box/bearing to the top of the tubing when the rudder post is in place. This can be done easily using...

    $244.00
  • Drop Conduit Bracket Drop Conduit Bracket

    Drop Conduit Bracket

    Edson’s Drop Conduit Bracket drops the conduit ends 2” (51mm) below the cockpit floor (more if blocked down).  This makes it easier to feed wires into the conduit and allows for easier lubrication and maintenance of the conduit system...

    $111.00
  • Upright Conduit Idler - 4" Sheave Upright Conduit Idler - 4" Sheave

    Upright Conduit Idler - 4" Sheave

    Upright Conduit Idlers allow you to turn steering cable around a sheave rather than through the conduit, reducing wear and friction.  Upright Conduit Idlers are an absolute must on boats over 39’ (12m). (Sold without Pull/Pull Conduit and...

    $270.00
  • Conduit End Fitting for 7/8" Conduit

    Conduit End Fitting for 7/8" Conduit

    Edson’s #854-312 Conduit End Fittings are designed to fit Edson's #853-312 7/8" Conduit. Two fittings are required for each length of conduit. #854-312 fittings are black anodized, machined Aluminum and have an end fitting thread...

    $191.00
  • Chain & Wire Kit - 2S2B7 (77109) Chain & Wire Kit - 2S2B7 (77109) Chain & Wire Kit - 2S2B7 (77109) Chain & Wire Kit - 2S2B7 (77109) Chain & Wire Kit - 2S2B7 (77109)

    Chain & Wire Kit - 2S2B7 (77109)

    Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

    $325.00
  • Stainless Steel Shaft Collar 960-A-2715) Stainless Steel Shaft Collar 960-A-2715) Stainless Steel Shaft Collar 960-A-2715)

    Stainless Steel Shaft Collar 960-A-2715)

    Edson's Stainless Steel Shaft Collar helps prevent your steering wheel shaft from moving forward and aft of the boat while in use.   #960-A-2715 Stainless Steel Shaft Collar: Includes two pieces to form the clamp with two tightening screws. 1-inch...

    $48.00