Products - Page 4

Steering hardware, wheels, accessories, electronic mounts, and pumps highlight what Edson has to offer in this complete catalog of products.

Sailboat Steering Systems & Steering Wheels

Sailboat Pedestal & Cockpit Accessories

Power Boat Steering Wheels & PowerKnobs

Electronics Mounting Systems

Marine Accessories for Power Boats and Sailboats

Marine Manual Pumps for Power Boats & Sailboats

Transom Boot (960-B-446)

MSRP:

Was:

Now: $65.00

Add to Cart
2" Vertical Rudder Stop (862-2)

MSRP:

Was:

Now: $73.00

Add to Cart
3" Aluminum Hex Head Pedestal Bolt (646-3HEX)

MSRP:

Was:

Now: $9.00

Add to Cart
1/4" Square Wheel Key - Straight Shafts (684-250W)

MSRP:

Was:

Now: $11.00

Add to Cart
3” Bronze Sheave (ONLY)

MSRP:

Was:

Now: $94.00

Add to Cart
Single Upright Bronze Sheave Assembly - 4" Sheave

MSRP:

Was:

Now: $230.00

Add to Cart
Adjustable Crossed-Wire Idler - 4" Sheave

MSRP:

Was:

Now: $498.00

Add to Cart
Adjustable Idler - 4" Aluminum Sheave

MSRP:

Was:

Now: $521.00

Add to Cart
Double Articu-Lock Sheave Assembly - 4" Aluminum Sheave

MSRP:

Was:

Now: $415.00

Add to Cart
Bronze Tiller Head Fitting for 1" Rudder Post

MSRP:

Was:

Now: $417.00

Add to Cart
Stainless Sprocket - 11 Tooth for 5/8” #50 Chain (Thru Shaft Brake) (855-2-11-TSB)

MSRP:

Was:

Now: $293.00

Add to Cart
Stainless Single Hub Sprocket - 11 Tooth for 5/8” #50 Chain (636-2-11-SS)

MSRP:

Was:

Now: $354.00

Add to Cart
Flax Packing for Stuffing Boxes

MSRP:

Was:

Now: $21.00

Add to Cart
Conduit & Bearing Lubricant - 3oz tube of Teflon Grease

MSRP:

Was:

Now: $20.00

Add to Cart
Transom Mount Conduit Bracket

MSRP:

Was:

Now: $235.00

Add to Cart
Flat Conduit Idler - 4" Sheave

MSRP:

Was:

Now: $223.00

Add to Cart
3/4" Pull/Pull Conduit by the Foot for 3/16" and 1/4" Wire Rope

MSRP:

Was:

Now: $20.00

Add to Cart
Chain & Wire Kit - 2S15B7 (77101)

MSRP:

Was:

Now: $317.00

Add to Cart
3.5-inch Teak Handle

MSRP:

Was:

Now: $95.00

Add to Cart
24-inch Classic Teak Yacht Wheel with 1-inch Straight Hub

MSRP:

Was:

Now: $3,237.00
408 Needle Bearing Shelf Steerer - 11 Tooth Sprocket - Tapered Shaft (With Brake)

MSRP:

Was:

Now: $1,213.00
418 Bulkhead Steerer - 11 Tooth Sprocket - Tapered Shaft (With Brake)

MSRP:

Was:

Now: $1,055.00
420 Bulkhead Steerer - 11 Tooth Sprocket - Tapered Shaft (With Brake)

MSRP:

Was:

Now: $921.00
Vision NV CD-i Pedestal - Tapered Shaft

Transom Boot (960-B-446)

Edson's 960-B-446 Transom Boot is apart of Edson's Transom Hung Rudder Steering System. Ideal for boats with Transom Hung Rudders up to 27' (8.5m).

MSRP:

Was:

Now: $65.00

Add to Cart
2" Vertical Rudder Stop (862-2)

Edson's 2" Vertical Rudder Stops are designed to limit the swing of the rudder. Attached directly to an Edson Radial Drive Wheel or Edson's Pull-Pull Conduit Bracket to limit the swing of the Quadrant. Bolts used are 3/8-16 x 1" long to...

MSRP:

Was:

Now: $73.00

Add to Cart
3" Aluminum Hex Head Pedestal Bolt (646-3HEX)

Since 1987, all Edson Pedestals use the exclusive Edson Hex Head Aluminum Bolts. With this improvement they lock in place and require only one person to tighten them. They fit flush with the base and the aluminum alloy is the same as the base thus...

MSRP:

Was:

Now: $9.00

Add to Cart
1/4" Square Wheel Key - Straight Shafts (684-250W)

Edson's 1/4" Square Wheel Key is designed for Edson's Straight Shafts for 335 Pedestals (Side Brake Model) & Edson's 336 Pedestal (Through Shaft Brake Model).

MSRP:

Was:

Now: $11.00

Add to Cart
3” Bronze Sheave (ONLY)

Edson’s Sheaves may be the answer in many areas of custom boat building, not only for steering but also for centerboards, custom deck hardware, or remote actuators, such as emergency shut off valves and CO2 systems. Great care should be...

MSRP:

Was:

Now: $94.00

Add to Cart
Single Upright Bronze Sheave Assembly - 4" Sheave

Edson’s Single Upright Bronze Sheave Assembly with a 4" Sheave are specially designed for use in wire rope steering systems for sailboats. The Aluminum Sheaves are ideal for the performance boat that requires sensitive, lightweight steering...

MSRP:

Was:

Now: $230.00

Add to Cart
Adjustable Crossed-Wire Idler - 4" Sheave

Edson’s Adjustable Crossed-Wire Idler - for use on boats where the quadrant is aft of the rudder post or on Radial Drive Steering Systems when the pedestal is located forward of the rudder post. This exclusive Edson design crosses the wire...

MSRP:

Was:

Now: $498.00

Add to Cart
Adjustable Idler - 4" Aluminum Sheave

Edson’s Adjustable Idler - designed for boats having the quadrant on the forward side of the rudder post, and the pedestal either forward or aft of the rudder post. They can be used for Radial Drive Steering Systems when the pedestal is located aft...

MSRP:

Was:

Now: $521.00

Add to Cart
Double Articu-Lock Sheave Assembly - 4" Aluminum Sheave

Edson’s Articu-Lock Sheaves – Ideal for performance sailboats, cruising/racing catamarans and high-tech cruising yachts above 27 feet. Edson engineers have designed this new sheave to be lightweight, strong and extremely easy to align and...

MSRP:

Was:

Now: $415.00

Add to Cart
Bronze Tiller Head Fitting for 1" Rudder Post

Edson’s Bronze Tiller Head Fittings have a classic look and feel that compliments both traditional and modern boats alike. 965BR-100 Tiller Head is designed for 1-inch diameter rudder post with a 1/4-inch key. Leaving 1.5-inches space to...

MSRP:

Was:

Now: $417.00

Add to Cart
Stainless Sprocket - 11 Tooth for 5/8” #50 Chain (Thru Shaft Brake) (855-2-11-TSB)

Use Edson's double hub sprockets when space will allow; their extra length will spread the load. They are the same as the single hub sprockets but have a hub on both sides of the sprocket teeth with one side knurled for a brake. The Double Hub Sprocket...

MSRP:

Was:

Now: $293.00

Add to Cart
Stainless Single Hub Sprocket - 11 Tooth for 5/8” #50 Chain (636-2-11-SS)

When space is limited, use Edson's non-magneticSingle Hub Sprockets. With the hub on one side, the sprocket takes up less space within the pedestal head. These sprockets accept American Standard Roller Chains. Part Number Material Hub...

MSRP:

Was:

Now: $354.00

Add to Cart
Flax Packing for Stuffing Boxes

Waxed Flax packing for re-lining your stuffing box. 3/8” square x 16.5” long for rudderposts up to 4.5" diameter. Easily cut to fit for smaller rudderposts.

MSRP:

Was:

Now: $21.00

Add to Cart
Conduit & Bearing Lubricant - 3oz tube of Teflon Grease

Edson’s Conduit Lubricant is a Teflon grease for use in all Edson Systems. Ideal for both conduit and needle bearing use. 827-3 Conduit Lubricant - 3oz tube of Teflon Grease !WARNING! DO NOT USE PETROLEUM BASED GREASE...

MSRP:

Was:

Now: $20.00

Add to Cart
Transom Mount Conduit Bracket

Edson's Transom Mount Conduit Bracket is ideal for terminating the conduits at the quadrant when there are no bulkheads to utilize. It is easily bolted through he cockpit sole, this 24" Transom Mount version is used with Edson's Small Boat Steerer or...

MSRP:

Was:

Now: $235.00

Add to Cart
Flat Conduit Idler - 4" Sheave

Edson’s Flat Conduit Idler allow you to turn steering cable around a sheave rather than through the conduit, reducing wear and friction. Constructed of anodized Aluminum sheaves and a Brass housing, it is designed to be mounted to a...

MSRP:

Was:

Now: $223.00

Add to Cart
3/4" Pull/Pull Conduit by the Foot for 3/16" and 1/4" Wire Rope

Edson Pull-Pull Conduit Systems are designed to provide the ability to run steering cables around spaces or structures that otherwise might be difficult or impossible with straight wire runs from sheave to sheave. Pull-Pull System components have...

MSRP:

Was:

Now: $20.00

Add to Cart
Chain & Wire Kit - 2S15B7 (77101)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $317.00

Add to Cart
3.5-inch Teak Handle

Edson's 3.5" Teak Handle comes varnished and can be used on home built wheels to replace original handles for a finished look. Complete with 3⁄8”-16 stainless carriage bolts.

MSRP:

Was:

Now: $95.00

Add to Cart
24-inch Classic Teak Yacht Wheel with 1-inch Straight Hub

Edson's Classic Teak Yacht Wheel is the true original! In production for over 125 years, this is a wheel that belongs on any classic yacht or stately passage-maker. Handcrafted to the highest offshore-quality standards, and will provide years...

MSRP:

Was:

Now: $3,237.00
408 Needle Bearing Shelf Steerer - 11 Tooth Sprocket - Tapered Shaft (With Brake)

Edson’s Needle Bearing Shelf Steerers are designed to provide precise steering control for larger boats. They are highly desirable due to their dependability, super sensitive “feel” and friction-free performance. Designed to be...

MSRP:

Was:

Now: $1,213.00
418 Bulkhead Steerer - 11 Tooth Sprocket - Tapered Shaft (With Brake)

Edson's 418 Bulkhead Steerer is lightweight, versatile and rugged. For use on performance and cruising boats alike. Edson’s Bulkhead Steerers feature Stainless Steel Needle Bearings to reduce friction, a Thru-Shaft Wheel Brake, all stainless...

MSRP:

Was:

Now: $1,055.00
420 Bulkhead Steerer - 11 Tooth Sprocket - Tapered Shaft (With Brake)

Designed for boats with built-in pedestal consoles, Edson’s new Bulkhead Steerer features easy installation, Edson’s super-sensitive Stainless Needle Bearings, a Thru-Shaft Wheel Brake, all-stainless construction and the ability to...

MSRP:

Was:

Now: $921.00
Vision NV CD-i Pedestal - Tapered Shaft

Edson's Vision NV CD-i Pedestal utilizes a simple, direct linkage from tiller to wheel. All CDi Geared Steerers feature exceptional feel, easy installation and a wide range of mounting options. Edson's #450-NV-T Pedestal is CE compliment...

Shop