null

Shop

Steering hardware, wheels, accessories, electronic mounts, and pumps highlight what Edson has to offer in this complete catalog of products.


  • Chain & Wire Kit - 2S25B7 (77117) Chain & Wire Kit - 2S25B7 (77117) Chain & Wire Kit - 2S25B7 (77117) Chain & Wire Kit - 2S25B7 (77117) Chain & Wire Kit - 2S25B7 (77117)

    Chain & Wire Kit - 2S25B7 (77117)

    Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

    $401.00
  • Compass Bolts 1" (set of 4)

    Compass Bolts 1" (set of 4)

    1" compass bolts (1/4"-20) with nylon washers and Teflon-based corrosion inhibitor.Sold as a set of four bolts. Use these bolts for installing a compass directly on top of an Edson classic pedestal (without an engine control).

    $18.00
  • Stainless Steel Wire Clip Stainless Steel Wire Clip

    Stainless Steel Wire Clip

    Edson’s Teak and Poly Drop Leaf and Luncheon Tables use a Stainless Steel Wire Clip attached to the bottom of the table that secures the Wire Form that acts as a table leg keeping the table from folding down while in use...

    $11.00
  • 10" Bronze Sheave with Needle Bearings (ONLY)

    10" Bronze Sheave with Needle Bearings (ONLY)

    Edson’s Sheaves may be the answer in many areas of custom boat building, not only for steering but also for centerboards, custom deck hardware, or remote actuators, such as emergency shut off valves and CO2 systems. Great care should be...

    $687.00
  • Flat Aluminum Sheave Assembly - 10" Aluminum Sheave

    Flat Aluminum Sheave Assembly - 10" Aluminum Sheave

    Edson’s Flat Sheave Assembly will allow you to turn steering cable around a sheave in tight areas where vertical assemblies normally wouldn't fit. Constructed of anodized Aluminum sheaves and housing, it is designed to be mounted to...

    $908.00
  • Bronze Rudder Post Stuffing Box - 1.75" ID Bronze Rudder Post Stuffing Box - 1.75" ID Bronze Rudder Post Stuffing Box - 1.75" ID

    Bronze Rudder Post Stuffing Box - 1.75" ID

    Edson's Rudder Post Stuffing Box combines a rudder post bearing with an above-the-waterline stuffing box for. We recommend fiberglassing the stuffing box/bearing to the top of the tubing when the rudder post is in place. This can be done easily using...

    $258.00
  • Chain & Wire Kit - 2S2B22 (77115) Chain & Wire Kit - 2S2B22 (77115) Chain & Wire Kit - 2S2B22 (77115) Chain & Wire Kit - 2S2B22 (77115) Chain & Wire Kit - 2S2B22 (77115)

    Chain & Wire Kit - 2S2B22 (77115)

    Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

    $438.00
  • Chrome Hub for 36-inch to 42-inch Dia. Wheels

    Chrome Hub for 36-inch to 42-inch Dia. Wheels

    With Edson's Wheel Chrome Wheel Hub for 36”-42” Diameter Wheels you can make your own traditional mahogany or teak wheels! Using a two piece design, it allows you to assemble your wheel easily.  Chrome Hub 667CH-6 has a outside diameter...

    $1,167.00
  • Chain & Wire Kit - 2B2D9 (77200) Chain & Wire Kit - 2B2D9 (77200)

    Chain & Wire Kit - 2B2D9 (77200)

    Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

    $431.00
  • Quadrant

    Quadrant

    Edson’s Quadrants are made from cast Manganese Bronze or 356-T6 heat-treated Aluminum. Available in 8” through 36” radius sizes, the Edson Quadrant is effective whether mounted fore or aft of the rudderpost. The quadrants are machined...

  • Stainless Steel Hinge Stainless Steel Hinge Stainless Steel Hinge

    Stainless Steel Hinge

    Edson’s Teak and Poly Drop Leaf Tables use a Stainless Steel Hinges that attached the leaves of the table to the center table. Edson's 960-A-2097 Stainless Steel Hinges will replace any old, broken or lost Hinges on an Edson...

    $36.00
  • 12" Aluminum Sheave with Needle Bearings (ONLY)

    12" Aluminum Sheave with Needle Bearings (ONLY)

    Edson’s Sheaves may be the answer in many areas of custom boat building, not only for steering but also for centerboards, custom deck hardware, or remote actuators, such as emergency shut off valves and CO2 systems. Great care should be...

    $1,661.00
  • Flat Bronze Sheave Assembly - 10" Bronze Sheave

    Flat Bronze Sheave Assembly - 10" Bronze Sheave

    Edson’s Flat Sheave Assembly will allow you to turn steering cable around a sheave in tight areas where vertical assemblies normally wouldn't fit. Constructed of Bronze sheaves and housing, it is designed to be mounted to a flat...

    $1,090.00
  • Bronze Rudder Post Stuffing Box - 1.875" ID Bronze Rudder Post Stuffing Box - 1.875" ID Bronze Rudder Post Stuffing Box - 1.875" ID

    Bronze Rudder Post Stuffing Box - 1.875" ID

    Edson's Rudder Post Stuffing Box combines a rudder post bearing with an above-the-waterline stuffing box for. We recommend fiberglassing the stuffing box/bearing to the top of the tubing when the rudder post is in place. This can be done easily using...

    $258.00
  • Chain & Wire Kit - 2B2D9 (77201) Chain & Wire Kit - 2B2D9 (77201) Chain & Wire Kit - 2B2D9 (77201) Chain & Wire Kit - 2B2D9 (77201) Chain & Wire Kit - 2B2D9 (77201)

    Chain & Wire Kit - 2B2D9 (77201)

    Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

    $457.00
  • Pro Series PowerKnob main product photo Pro Series PowerKnob installed Pro Series PowerKnob installed on Edson wheel Pro Series PowerKnob package contents PowerKnob ball bearing details

    ProSeries PowerKnob (969ST-18)

    Edson Marine Pro-Series PowerKnob: Edson’s classic Stainless PowerKnob is hands-down the best available on the market today. Polished stainless to compliment any boat, this is one accessory you won’t know how you lived without. Strap to...

    $153.00