Shop

Sheave Pins for 6" Sheaves - Stainless Steel (960-A-1301)

In the early 1990s Edson upgraded the materials of sheave pins from brass to stainless steel. Brass pins were known to wear down over time creating complications in steering systems. For any boats made prior to that time period, please check your sheaves...

Brake Knob for Side Brake (335 Pedestals)

Stainless steel brake knob for side breaks on Edson's 335 pedestals. 

Engine Control Sleeve for Clutch on 816ST-45

Delrin bushing to replace a worn or broken bushing on the internal clutch lever assembly for 816ST-45 engine controls.   ID = 1"

Internal Clutch Lever Assembly (For 816ST-45 Engine Controls)

Internal Cutch Lever Assembly to replace parts in 816ST-45 engine controls. Includes bushing and fasteners Hardware Clutch set screw (bottom side): 8-32 x 1/2" R.H.

Pumpout Nozzle with Splash Guard - Female Quick Clamp 1.5" (27225)

Pumping out a boat's holding tank has now been made easier and safer with Edson's Universal Pumpout Nozzle with Splash Guard. This pumpout nozzle is attached to a female 1.5" quick clamp (camlock) adapter so it can be interchanged with other deck...

Pumpout Nozzle with Splash Guard - Male Quick Clamp 1.5" (27220)

Former product 272QC-150-SG.   Pumping out a boat's holding tank has now been made easier and safer with Edson's Universal Pumpout Nozzle with Splash Guard. This pumpout nozzle is attached to a male 1.5" quick clamp (camlock) adapter so it can be...

Pumpout Nozzle with Splash Guard - Male Quick Clamp 1.5" 272QC-150-SG (Updated Part is 27220)

This product has been updated, please see part 27220.   Pumping out a boat's holding tank has now been made easier and safer with Edson's Universal Pumpout Nozzle with Splash Guard. This pumpout nozzle is attached to a male 1.5" quick clamp...

Pumpout Nozzle with Splash Guard X 1.5" Hose Barb(27222)

Pumping out a boat's holding tank has now been made easier and safer with Edson's Universal Pumpout Nozzle with Splash Guard. This pumpout nozzle comes fixed to a 1½" Hose Barb so it can be permanently attached to a 1½" ID hose. The suction...

Pumpout Nozzle with Splash Guard X 1.5" Male NPT (27221)

Pumping out a boat's holding tank has now been made easier and safer with Edson's Universal Pumpout Nozzle with Splash Guard. This pumpout nozzle comes attached to a 1.5" Male NPT Close Nipple so it can be permanently screwed into a 1.5" ball valve. The...

1.25" Waste Deck Fitting Adapter (273-125)

This pumpout adapter provides the most secure connection of pumpout hose to boat by using a quick clamp adapter (1.5" Male Quick Clamp X 1.25" Male NPT) and flat sealing washers. The male thread end of an adapter is screwed into the boat waste deck...

1.5" Waste Deck Fitting Adapter (273-150)

This pumpout adapter provides the most secure connection of pumpout hose to boat by using a quick clamp adapter (1.5" Male Quick Clamp X 1.5" Male NPT) and flat sealing washers. The male thread end of an adapter is screwed into the boat waste deck...

18" Aluminum Handle with Grip (3/4" dia.) (160-A-1013AL)

This 3/4" diameter solid Aluminum handle is designed to fit Edson's manual diaphragm pumps. A ergonomic grip and 18" length make it comfortable to use.   Comes standard with 217, 254, 256, and 258 pumps.

32" Stainless Handle with Grip (3/4" dia.) (160-A-41ST)

This 3/4" diameter solid Stainless Steel handle is designed to fit Edson's manual diaphragm pumps. A ergonomic grip and 32" length make it comfortable to use. Comes standard with 117, 165-18, 165-30, 554, 557, and 638 pumps.  

Foot Valve - Bronze With Strainer & Nitrile Check - 1.5" FNPT (130N-150)

Edson's Foot Valve w/ bronze strainer and Nitrile check valve keeps debris and stones out of your pump while maintaining a prime in the suction line. It come equipped with mounting studs on the strainer so it can be fixed for permanent installations...

Foot Valve - Bronze With Strainer & Nitrile Check - 2" FNPT (130N-200)

Edson's Foot Valve w/ bronze strainer and Nitrile check valve keeps debris and stones out of your pump while maintaining a prime in the suction line. It come equipped with mounting studs on the strainer so it can be fixed for permanent installations...

Strainer - Shatterproof Bronze - 1.5" FNPT (111BS-150)

The Edson Shatterproof Bronze Strainer is used to prevent clogging of a suction hose, pipe and pump. The resilience, corrosive resistance and non-sparking character of marine grade bronze will provide extended life over aluminum, cast steel or plastic...

Strainer - Shatterproof Bronze - 2" FNPT (111BS-200)

The Edson Shatterproof Bronze Strainer is used to prevent clogging of a suction hose, pipe and pump. The resilience, corrosive resistance and non-sparking character of marine grade bronze will provide extended life over aluminum, cast steel or plastic...

Bushing for Pedestal Guards and Rail Mounts

Edson's Replacement Delrin Bushings are used to adapt your pedestal guard and rail mount accessories to your rails. Most of our pedestal guard and rail mount accessories have an opening of 1-1/4" and come with these bushings so they can be adapted to...

PowerKnob Ball Bearings

Replacement ball bearings for all Edson PowerKnobs since 2001. Package of 18.

Flanged Bushing (Diamond Series Wheels Only)

Used on Diamond Series wheel where for the bolts that mount the wheel onto the flange. 

Superlube 1/2oz Tube

CDi Side Brake Collar - Bronze

CDi Brake Collar - Bronze. For CDi's with side brakes ONLY. A replacement for worn out brake collars found on CDi pedestals.  Machined to fit the downtube for even clamping force around it.  This is NOT compatible for CDi pedestals that use a...

Pedestal Bolts - Flats Kit

4 SS bolts - 1/2-13 x 4" flat head with nuts and Tefgel. Only for Classic Edson pedestals made prior to 1987. 1987 and after uses a hex head aluminum bolt. 

Vision Instrument Housing - 2 Instrument

2 instrument housing suitable for mounting on any brand pedestal guard. If this is not a replacement for an original mount it requires 2 mounting clamps sold separately (Edson part # 861-100-125) with adapters to work on guard pipes from 1" to 1.25"...