Products - Page 7

Steering hardware, wheels, accessories, electronic mounts, and pumps highlight what Edson has to offer in this complete catalog of products.

Sailboat Steering Systems & Steering Wheels

Sailboat Pedestal & Cockpit Accessories

Electronics Mounting Systems

Marine Accessories for Sailboats

Marine Manual Pumps for Power Boats & Sailboats

6in Aluminum Sheave with Needle Bearings (ONLY)

MSRP:

Was:

Now: $169.00

Add to Cart
Flat Bronze Sheave Assembly - 4" Aluminum Sheave

MSRP:

Was:

Now: $237.00

Add to Cart
Single Upright Aluminum Sheave Assembly - 10" Sheave

MSRP:

Was:

Now: $809.00

Add to Cart
Adjustable Cross Wire Compact Idler - 4" Sheave

MSRP:

Was:

Now: $545.00

Add to Cart
Adjustable Compact Idler - 6" Aluminum Sheave

MSRP:

Was:

Now: $642.00

Add to Cart
Single Articu-Lock Sheave Assembly - 6" Aluminum Sheave

MSRP:

Was:

Now: $362.00

Add to Cart
Chrome Tiller Head Fitting for 1.25" - 1.50" Dia. Rudder Post

MSRP:

Was:

Now: $1,329.00

Choose Options
Bronze Rudder Post Stuffing Box - 1.25" ID

MSRP:

Was:

Now: $251.00

Add to Cart
In-Line Conduit Greaser - for 853-312 Conduit

MSRP:

Was:

Now: $160.00

Add to Cart
Internal Conduit Bracket

MSRP:

Was:

Now: $143.00

Add to Cart
In-Out Conduit Idler with Needle Bearings - 6" Sheave

MSRP:

Was:

Now: $466.00

Add to Cart
Conduit End Fitting for 3/4" Conduit

MSRP:

Was:

Now: $49.00

Add to Cart
Chain & Wire Kit - 2S15B22 (77107)

MSRP:

Was:

Now: $393.00

Add to Cart
418 Bulkhead Steerer - 11 Tooth Sprocket - Tapered Shaft (Less Brake)

MSRP:

Was:

Now: $1,026.00
402 Classic Series Pedestal - 11 Tooth Sprocket - Straight Shaft

MSRP:

Was:

Now: $2,654.00
Needle Bearing 1" (960-A-140-1)

MSRP:

Was:

Now: $62.00

Add to Cart
Brake Knob & Shaft Assembly for #420 Steerers

MSRP:

Was:

Now: $147.00

Add to Cart
Chain & Wire Kit - 2S2B7 (77108)

MSRP:

Was:

Now: $308.00

Add to Cart
Brake Kit for 336 & 402 Pedestals with Thru Shaft Brake (316-336-402-TSB)

MSRP:

Was:

Now: $105.00

Add to Cart
Ritchie Weather Shield

MSRP:

Was:

Now: $53.00

Add to Cart
Pedestal Guard Kit - 58" Angled - 8" Top Plate

MSRP:

Was:

Now: $651.00

Add to Cart
10in Clutch Lever with Black Knob

MSRP:

Was:

Now: $62.00

Add to Cart
Single Lever Engine Control for Edson Pedestal #336 with 58" Offset Guard

MSRP:

Was:

Now: $1,663.00

Add to Cart
Console Table Mounting Bracket

MSRP:

Was:

Now: $80.00

Add to Cart

6in Aluminum Sheave with Needle Bearings (ONLY)

Edson’s Sheaves may be the answer in many areas of custom boat building, not only for steering but also for centerboards, custom deck hardware, or remote actuators, such as emergency shut off valves and CO2 systems. Great care should be...

MSRP:

Was:

Now: $169.00

Add to Cart
Flat Bronze Sheave Assembly - 4" Aluminum Sheave

Edson’s Flat Sheave Assembly will allow you to turn steering cable around a sheave in tight areas where vertical assemblies normally wouldn't fit. Constructed of anodized Aluminum sheaves and a Bronze housing, it is designed to be...

MSRP:

Was:

Now: $237.00

Add to Cart
Single Upright Aluminum Sheave Assembly - 10" Sheave

Edson’s Single Upright Aluminum Sheave Assembly with a 10" Sheave are specially designed for use in wire rope steering systems for sailboats. The Aluminum Sheaves are ideal for the performance boat that requires sensitive, lightweight steering...

MSRP:

Was:

Now: $809.00

Add to Cart
Adjustable Cross Wire Compact Idler - 4" Sheave

Designed especially for Edson’s #476 Vision II Compact Pedestal. Recessed versions also available.

MSRP:

Was:

Now: $545.00

Add to Cart
Adjustable Compact Idler - 6" Aluminum Sheave

Edson’s Compact Idler - designed especially for Edson’s #476 Vision II Compact Pedestal. Recessed versions also available.

MSRP:

Was:

Now: $642.00

Add to Cart
Single Articu-Lock Sheave Assembly - 6" Aluminum Sheave

Edson’s Articu-Lock Sheaves – Ideal for performance sailboats, cruising/racing catamarans and high-tech cruising yachts above 27 feet. Edson engineers have designed this new sheave to be lightweight, strong and extremely easy to align and...

MSRP:

Was:

Now: $362.00

Add to Cart
Chrome Tiller Head Fitting for 1.25" - 1.50" Dia. Rudder Post

Edson’s Chrome Plated Bronze Tiller Head Fittings have a classic look and feel that compliments both traditional and modern boats alike. 965CH-125-150 Tiller Head is designed for rudder posts with a diameter from 1.25-inches to 1...

MSRP:

Was:

Now: $1,329.00

Choose Options
Bronze Rudder Post Stuffing Box - 1.25" ID

Edson's Rudder Post Stuffing Box combines a rudder post bearing with an above-the-waterline stuffing box for. We recommend fiberglassing the stuffing box/bearing to the top of the tubing when the rudder post is in place. This can be done easily using...

MSRP:

Was:

Now: $251.00

Add to Cart
In-Line Conduit Greaser - for 853-312 Conduit

Edson’s In-Line Conduit Greasers are a simple, efficient way to lubricate your conduit. One should be installed in an accessible area of straight conduit as close to the middle of each run as possible - preferably every 3’-5’ where...

MSRP:

Was:

Now: $160.00

Add to Cart
Internal Conduit Bracket

Internal Conduit Bracket mounts inside the pedestal column, allowing the conduit to hug the bottom of the cockpit floor. For ease of installation and maintenance, it is held in position by the pedestal mounting bolts. Edson’s #868-2...

MSRP:

Was:

Now: $143.00

Add to Cart
In-Out Conduit Idler with Needle Bearings - 6" Sheave

In-Out Conduit Idler With Needle Bearings is designed to increase the efficiency and sensitivity of a Pull-Pull Conduit System. Engineered with 6” sheaves three holes to accept Edson’s Conduit End Fittings, the idler makes...

MSRP:

Was:

Now: $466.00

Add to Cart
Conduit End Fitting for 3/4" Conduit

Edson’s #854-250 Conduit End Fittings are designed to fit Edson's #853-250 3/4" Conduit. Two fittings are required for each length of conduit. #854-250 fittings are molded in white Celcon and have an end fitting thread size of ...

MSRP:

Was:

Now: $49.00

Add to Cart
Chain & Wire Kit - 2S15B22 (77107)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $393.00

Add to Cart
418 Bulkhead Steerer - 11 Tooth Sprocket - Tapered Shaft (Less Brake)

Edson's 418 Bulkhead Steerer is lightweight, versatile and rugged. For use on performance and cruising boats alike. Edson’s Bulkhead Steerers feature Stainless Steel Needle Bearings to reduce friction, all stainless construction and the ability...

MSRP:

Was:

Now: $1,026.00
402 Classic Series Pedestal - 11 Tooth Sprocket - Straight Shaft

Edson's Classic Series Pedestals allow for great space within the cockpit. Edson's #402-6-211S Pedestal has an 8" top diameter and features a convenient thru-shaft brake. Thanks to additional reinforcement and the addition of a third steerer shaft...

MSRP:

Was:

Now: $2,654.00
Needle Bearing 1" (960-A-140-1)

Edson's Needle Bearing (960-A-140-1) is used in different steerers like the 418 and 420 bulkhead steerers. (Sold Individually) Specifications: Needle Bearing 1" long – Stainless Fits 1” Shafts

MSRP:

Was:

Now: $62.00

Add to Cart
Brake Knob & Shaft Assembly for #420 Steerers

For #420 Steerers with a Through Shaft Brake For Standard A=1-5/8" with standard Edson Destroyer Wheel. If you do not have an Edson Destroyer Wheel and your wheel hub is thicker than 1" please contact Edson's customer service team at info@edsonintl...

MSRP:

Was:

Now: $147.00

Add to Cart
Chain & Wire Kit - 2S2B7 (77108)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials. One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink plastic...

MSRP:

Was:

Now: $308.00

Add to Cart
Brake Kit for 336 & 402 Pedestals with Thru Shaft Brake (316-336-402-TSB)

Just like your car, your boat’s wheel brake needs periodic relining. This kit includes all you need to make your brake work like new again. #316-336-402-TSB Brake Maintenance Kit includes: (1) Brake Collar (960-A-1793) (1)...

MSRP:

Was:

Now: $105.00

Add to Cart
Ritchie Weather Shield

Edson recommends the use of the Ritchie Weather Shield with the installation of any Binnacle Mount Compass on Edson 335 & 336 Pedestals. The weather shield helps prevent water infiltration into the pedestal or below decks through the pedestal

MSRP:

Was:

Now: $53.00

Add to Cart
Pedestal Guard Kit - 58" Angled - 8" Top Plate

Edson's Angled Pedestal Guard Kit gives you extra room to install Instrument Housings, Radar Pods or multiple displays while the new angle increases their visibility.Edson Pedestal Guard Kit includes Stainless Guard Pipe, Top Plate and Mounting Feet...

MSRP:

Was:

Now: $651.00

Add to Cart
10in Clutch Lever with Black Knob

Edson's replacement 10” Clutch Lever with Black Knob is for #751ST Engine Control. Also used to extend clutch handle to avoid hitting wheel mounted autopilot.

MSRP:

Was:

Now: $62.00

Add to Cart
Single Lever Engine Control for Edson Pedestal #336 with 58" Offset Guard

Edson’s Single Lever Engine Control for Edson Pedestal #336 with 58" Offset Guard provides simple, safe, one-handed operation while maneuvering your boat under power. Mounted on the Pedestal with the 58" Offset 1-1⁄8” diameter...

MSRP:

Was:

Now: $1,663.00

Add to Cart
Console Table Mounting Bracket

Edson’s Teak and Poly Drop Leaf and Luncheon Tables use a Console Table Mounting Bracket that attaches to the Pedestal/Console allowing the Hinge pin to secure the table. Edson's 960-B-1208 Stainless Steel Hinge Pin will...

MSRP:

Was:

Now: $80.00

Add to Cart

Shop