Products - Page 8

Steering hardware, wheels, accessories, electronic mounts, and pumps highlight what Edson has to offer in this complete catalog of products.

Sailboat Steering Systems & Steering Wheels

Sailboat Pedestal & Cockpit Accessories

Power Boat Steering Wheels & PowerKnobs

Electronics Mounting Systems

Marine Accessories for Power Boats and Sailboats

Marine Manual Pumps for Power Boats & Sailboats

16-inch Teak Rimmed PowerWheel

MSRP:

Was:

Now: $1,800.00

Add to Cart
Pedestal Wheel Brake for Pre-2003 Steerers (689ST-456)

MSRP:

Was:

Now: $332.00

Add to Cart
Compass Pedestal Top Adapter - 402 and 464 Classic Pedestal

MSRP:

Was:

Now: $101.00

Add to Cart
Pedestal Guard Kit - 58" Straight - 8" Top Plate

MSRP:

Was:

Now: $618.00

Add to Cart
Engine Control Cable Clamp Aluminum

MSRP:

Was:

Now: $46.00

Add to Cart
6in Clutch Lever with Black Knob

MSRP:

Was:

Now: $58.00

Add to Cart
Single Lever Engine Control for Edson Pedestal #402 with 58" Angled Guard

MSRP:

Was:

Now: $1,703.00

Add to Cart
"Mechanical Shift" Engine Control

MSRP:

Was:

Now: $590.00

Add to Cart
Console Table Bracket Adapter (for Edson Vision NV pedestals)

MSRP:

Was:

Now: $55.00

Add to Cart
CDi Geared Steerer Maintenance & Spares Kit (312-CDI)

MSRP:

Was:

Now: $101.00

Add to Cart
O-Ring (960-A-1933)

MSRP:

Was:

Now: $4.00

Add to Cart
6in Aluminum Sheave with Needle Bearings (ONLY)

MSRP:

Was:

Now: $169.00

Add to Cart
Flat Bronze Sheave Assembly - 4" Aluminum Sheave

MSRP:

Was:

Now: $237.00

Add to Cart
Single Upright Aluminum Sheave Assembly - 10" Sheave

MSRP:

Was:

Now: $809.00

Add to Cart
Adjustable Cross Wire Compact Idler - 4" Sheave

MSRP:

Was:

Now: $545.00

Add to Cart
Adjustable Compact Idler - 6" Aluminum Sheave

MSRP:

Was:

Now: $642.00

Add to Cart
Single Articu-Lock Sheave Assembly - 6" Aluminum Sheave

MSRP:

Was:

Now: $362.00

Add to Cart
Chrome Tiller Head Fitting for 1.25" - 1.50" Dia. Rudder Post

MSRP:

Was:

Now: $1,329.00

Choose Options
Bronze Rudder Post Stuffing Box - 1.25" ID

MSRP:

Was:

Now: $251.00

Add to Cart
In-Line Conduit Greaser - for 853-312 Conduit

MSRP:

Was:

Now: $160.00

Add to Cart
Internal Conduit Bracket

MSRP:

Was:

Now: $143.00

Add to Cart
In-Out Conduit Idler with Needle Bearings - 6" Sheave

MSRP:

Was:

Now: $466.00

Add to Cart
Conduit End Fitting for 3/4" Conduit

MSRP:

Was:

Now: $49.00

Add to Cart
Chain & Wire Kit - 2S15B22 (77107)

MSRP:

Was:

Now: $393.00

Add to Cart

16-inch Teak Rimmed PowerWheel

16-inch Teak Rimmed PowerWheel: This elegant design is perfect for dressing up a flybridge or pilothouse. Teak rim has solid aluminum center for strength. Easily removable for re-varnishing and the spokes are powder-coated Black. With 3/4" taper...

MSRP:

Was:

Now: $1,800.00

Add to Cart
Pedestal Wheel Brake for Pre-2003 Steerers (689ST-456)

Just like your car, your boat’s wheel brake needs periodic relining. Edson's 689ST-456 kit includes all you need to make your brake work like new again for Pedestals 334, 335, and 400 Classic Style Pedestals. The Edson Friction Brake for...

MSRP:

Was:

Now: $332.00

Add to Cart
Compass Pedestal Top Adapter - 402 and 464 Classic Pedestal

Edson’s Pedestal Top Adapters allow you to adapt nearly any compass to an Edson pedestal. They can also be used as a pedestal cover when not installing a compass. They are available in white marine-grade polymer. Furnished with...

MSRP:

Was:

Now: $101.00

Add to Cart
Pedestal Guard Kit - 58" Straight - 8" Top Plate

Provides protection for your compass, a convenient handhold and the ability to mount Instrument Housings, Radar Pods or multiple displays while increasing their visibility.Edson Pedestal Guard Kit includes Stainless Guard Pipe, Top Plate and Mounting...

MSRP:

Was:

Now: $618.00

Add to Cart
Engine Control Cable Clamp Aluminum

Edson's Aluminum Engine Control Cable Clamp #960-A-705 is for 9/16” 64 Series Cable (Use with #751 Controls).

MSRP:

Was:

Now: $46.00

Add to Cart
6in Clutch Lever with Black Knob

Edson's replacement 6” Clutch Lever with Black Knob is for use with Engine Control #816-45. Important to note that it is not used for Atomic 4 Engines, see #960-A-1158.

MSRP:

Was:

Now: $58.00

Add to Cart
Single Lever Engine Control for Edson Pedestal #402 with 58" Angled Guard

Edson’s Single Lever Engine Control for Edson Pedestal #402 with 58" Angled Guard provides simple, safe, one-handed operation while maneuvering your boat under power. Mounted on the Pedestal with the 58" Angled 1-1⁄8” diameter...

MSRP:

Was:

Now: $1,703.00

Add to Cart
"Mechanical Shift" Engine Control

Edson “Mechanical Shift” Clutch and Throttle Control is designed for use with 64 Series (Edson #735) Transmission Cables and 33 Series (Edson #734) Throttle Cables. Only for Edson Pedestals #334, 335, 336 and 337 with 6-7/8" diameter tops...

MSRP:

Was:

Now: $590.00

Add to Cart
Console Table Bracket Adapter (for Edson Vision NV pedestals)

Edson's Console Table Bracket Adapter allows you to mount Console Tables to the Edson Vision NV pedestals that has a curved front. Sold individually Designed for Edson's Console Table Mounting Bracket (960-B-1208)

MSRP:

Was:

Now: $55.00

Add to Cart
CDi Geared Steerer Maintenance & Spares Kit (312-CDI)

The ideal onboard maintenance & spares kit for any Edson CDi Geared Steering System. #312-CDI CDi Geared Steerer Maintenance & Spares Kit includes: (1) A-4161-A RH Rod End (1) A-4161-B LH Rod End (1) Wheel Shaft Key (1)...

MSRP:

Was:

Now: $101.00

Add to Cart
O-Ring (960-A-1933)

Edson's O-Ring (960-A-1933) is designed for Edson's 335 Pedestals (Side Brake Model) & Edson's 336 Pedestal (Through Shaft Brake Model). Dimensions: ID: 1" OD: 1.25"

MSRP:

Was:

Now: $4.00

Add to Cart
6in Aluminum Sheave with Needle Bearings (ONLY)

Edson’s Sheaves may be the answer in many areas of custom boat building, not only for steering but also for centerboards, custom deck hardware, or remote actuators, such as emergency shut off valves and CO2 systems. Great care should be...

MSRP:

Was:

Now: $169.00

Add to Cart
Flat Bronze Sheave Assembly - 4" Aluminum Sheave

Edson’s Flat Sheave Assembly will allow you to turn steering cable around a sheave in tight areas where vertical assemblies normally wouldn't fit. Constructed of anodized Aluminum sheaves and a Bronze housing, it is designed to be...

MSRP:

Was:

Now: $237.00

Add to Cart
Single Upright Aluminum Sheave Assembly - 10" Sheave

Edson’s Single Upright Aluminum Sheave Assembly with a 10" Sheave are specially designed for use in wire rope steering systems for sailboats. The Aluminum Sheaves are ideal for the performance boat that requires sensitive, lightweight steering...

MSRP:

Was:

Now: $809.00

Add to Cart
Adjustable Cross Wire Compact Idler - 4" Sheave

Designed especially for Edson’s #476 Vision II Compact Pedestal. Recessed versions also available.

MSRP:

Was:

Now: $545.00

Add to Cart
Adjustable Compact Idler - 6" Aluminum Sheave

Edson’s Compact Idler - designed especially for Edson’s #476 Vision II Compact Pedestal. Recessed versions also available.

MSRP:

Was:

Now: $642.00

Add to Cart
Single Articu-Lock Sheave Assembly - 6" Aluminum Sheave

Edson’s Articu-Lock Sheaves – Ideal for performance sailboats, cruising/racing catamarans and high-tech cruising yachts above 27 feet. Edson engineers have designed this new sheave to be lightweight, strong and extremely easy to align and...

MSRP:

Was:

Now: $362.00

Add to Cart
Chrome Tiller Head Fitting for 1.25" - 1.50" Dia. Rudder Post

Edson’s Chrome Plated Bronze Tiller Head Fittings have a classic look and feel that compliments both traditional and modern boats alike. 965CH-125-150 Tiller Head is designed for rudder posts with a diameter from 1.25-inches to 1...

MSRP:

Was:

Now: $1,329.00

Choose Options
Bronze Rudder Post Stuffing Box - 1.25" ID

Edson's Rudder Post Stuffing Box combines a rudder post bearing with an above-the-waterline stuffing box for. We recommend fiberglassing the stuffing box/bearing to the top of the tubing when the rudder post is in place. This can be done easily using...

MSRP:

Was:

Now: $251.00

Add to Cart
In-Line Conduit Greaser - for 853-312 Conduit

Edson’s In-Line Conduit Greasers are a simple, efficient way to lubricate your conduit. One should be installed in an accessible area of straight conduit as close to the middle of each run as possible - preferably every 3’-5’ where...

MSRP:

Was:

Now: $160.00

Add to Cart
Internal Conduit Bracket

Internal Conduit Bracket mounts inside the pedestal column, allowing the conduit to hug the bottom of the cockpit floor. For ease of installation and maintenance, it is held in position by the pedestal mounting bolts. Edson’s #868-2...

MSRP:

Was:

Now: $143.00

Add to Cart
In-Out Conduit Idler with Needle Bearings - 6" Sheave

In-Out Conduit Idler With Needle Bearings is designed to increase the efficiency and sensitivity of a Pull-Pull Conduit System. Engineered with 6” sheaves three holes to accept Edson’s Conduit End Fittings, the idler makes...

MSRP:

Was:

Now: $466.00

Add to Cart
Conduit End Fitting for 3/4" Conduit

Edson’s #854-250 Conduit End Fittings are designed to fit Edson's #853-250 3/4" Conduit. Two fittings are required for each length of conduit. #854-250 fittings are molded in white Celcon and have an end fitting thread size of ...

MSRP:

Was:

Now: $49.00

Add to Cart
Chain & Wire Kit - 2S15B22 (77107)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $393.00

Add to Cart

Shop