null

Shop

Steering hardware, wheels, accessories, electronic mounts, and pumps highlight what Edson has to offer in this complete catalog of products.


  • Bronze Rudder Post Stuffing Box - 1.375" ID Bronze Rudder Post Stuffing Box - 1.375" ID Bronze Rudder Post Stuffing Box - 1.375" ID

    Bronze Rudder Post Stuffing Box - 1.375" ID

    Edson's Rudder Post Stuffing Box combines a rudder post bearing with an above-the-waterline stuffing box for. We recommend fiberglassing the stuffing box/bearing to the top of the tubing when the rudder post is in place. This can be done easily using...

    $244.00
  • Drop Conduit Bracket Drop Conduit Bracket

    Drop Conduit Bracket

    Edson’s Drop Conduit Bracket drops the conduit ends 2” (51mm) below the cockpit floor (more if blocked down).  This makes it easier to feed wires into the conduit and allows for easier lubrication and maintenance of the conduit system...

    $111.00
  • Upright Conduit Idler - 4" Sheave Upright Conduit Idler - 4" Sheave

    Upright Conduit Idler - 4" Sheave

    Upright Conduit Idlers allow you to turn steering cable around a sheave rather than through the conduit, reducing wear and friction.  Upright Conduit Idlers are an absolute must on boats over 39’ (12m). (Sold without Pull/Pull Conduit and...

    $320.00
  • Conduit End Fitting for 7/8" Conduit

    Conduit End Fitting for 7/8" Conduit

    Edson’s #854-312 Conduit End Fittings are designed to fit Edson's #853-312 7/8" Conduit. Two fittings are required for each length of conduit. #854-312 fittings are black anodized, machined Aluminum and have an end fitting thread...

    $191.00
  • Chain & Wire Kit - 2S2B7 (77109) Chain & Wire Kit - 2S2B7 (77109) Chain & Wire Kit - 2S2B7 (77109) Chain & Wire Kit - 2S2B7 (77109) Chain & Wire Kit - 2S2B7 (77109)

    Chain & Wire Kit - 2S2B7 (77109)

    Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

    $325.00
  • Bronze Hub for 36-inch to 42-inch Dia. Wheels

    Bronze Hub for 36-inch to 42-inch Dia. Wheels

    With Edson's Wheel Bronze Wheel Hub for 36”-42” Diameter Wheels you can make your own traditional mahogany or teak wheels! Using a two piece design, it allows you to assemble your wheel easily.  Bronze Hub 667BR-6 has a outside diameter...

    $945.00
  • 13" Bronze PowerWheel (1700BR-13-750T)

    13-inch Bronze PowerWheel

    The 13-inch Edson Bronze PowerWheel is sure to dress up any boat - especially a classic sportfish or wooden runabout. Solid cast bronze construction is highly polished to a mirror finish, giving a deep, rich golden glow. Includes Brass Wheel Nut with...

  • Stainless Steel Shaft Collar 960-A-2715) Stainless Steel Shaft Collar 960-A-2715) Stainless Steel Shaft Collar 960-A-2715)

    Stainless Steel Shaft Collar 960-A-2715)

    Edson's Stainless Steel Shaft Collar helps prevent your steering wheel shaft from moving forward and aft of the boat while in use.   #960-A-2715 Stainless Steel Shaft Collar: Includes two pieces to form the clamp with two tightening screws. 1-inch...

    $48.00
  • Pedestal Riser - 2-1/2"

    Pedestal Riser - 2-1/2"

    Edson Pedestal Riser - Cast in Aluminum and finished in a highly durable glossy white baked-on urethane, the Pedestal Riser will raise your pedestal 2.5” (64mm) for more steering wheel clearance. You may need to order longer #646...

    $273.00
  • Pedestal Touch-Up Paint (A-2963)

    Pedestal Touch-Up Paint (A-2963)

    Edson’s White Touch-up Paint is custom formalized to match Edson’s white baked-on urethane powder coating finish.  Ideal for small nicks and scratches in your Pedestal, Engine Control or other white powder-coated aluminum parts...

    $34.00
  • Compass Cylinder

    Compass Cylinder

    Edson’s Compass Cylinders are distinctive, non-reflecting, and virtually indestructible. Great for new boats or upgrading your existing pedestal to a larger, easier to read compass. Fits Edson’s 335 and 336 pedestals, stands...

    $104.00
  • Pedestal Guard Kit - 58" Offset - 8" Top Plate Pedestal Guard Kit - 58" Offset - 8" Top Plate

    Pedestal Guard Kit - 58" Offset - 8" Top Plate

    Edson’s most versatile Guard, the Offset Guard provides you with better instrument visibility because we have moved the instruments forward by 7” (124.5 cm).Edson Pedestal Guard Kit includes Stainless Guard Pipe, Top Plate and Mounting Feet...

    $632.00
  • 8" Bronze Sheave with Needle Bearings (ONLY)

    8" Bronze Sheave with Needle Bearings (ONLY)

    Edson’s Sheaves may be the answer in many areas of custom boat building, not only for steering but also for centerboards, custom deck hardware, or remote actuators, such as emergency shut off valves and CO2 systems. Great care should be...

    $668.00
  • Flat Aluminum Sheave Assembly - 8" Aluminum Sheave

    Flat Aluminum Sheave Assembly - 8" Aluminum Sheave

    Edson’s Flat Sheave Assembly will allow you to turn steering cable around a sheave in tight areas where vertical assemblies normally wouldn't fit. Constructed of anodized Aluminum sheaves and housing, it is designed to be mounted to...

    $598.00
  • Bronze Rudder Post Stuffing Box - 1.625" ID Bronze Rudder Post Stuffing Box - 1.625" ID Bronze Rudder Post Stuffing Box - 1.625" ID

    Bronze Rudder Post Stuffing Box - 1.625" ID

    Edson's Rudder Post Stuffing Box combines a rudder post bearing with an above-the-waterline stuffing box for. We recommend fiberglassing the stuffing box/bearing to the top of the tubing when the rudder post is in place. This can be done easily using...

    $252.00