Products - Page 11

Steering hardware, wheels, accessories, electronic mounts, and pumps highlight what Edson has to offer in this complete catalog of products.

Sailboat Steering Systems & Steering Wheels

Sailboat Pedestal & Cockpit Accessories

Power Boat Steering Wheels & PowerKnobs

Electronics Mounting Systems

Marine Accessories for Power Boats and Sailboats

Marine Manual Pumps for Power Boats & Sailboats

Chrome Hub for 20-inch to 26-inch Dia. Wheels

MSRP:

Was:

Now: $933.00

Add to Cart
30-inch Classic Teak Yacht Wheel with Teak Rim with 1-inch Straight Hub

MSRP:

Was:

Now: $4,635.00
418 Bulkhead Steerer - 10 Tooth Sprocket - Tapered Shaft (Less Brake)

MSRP:

Was:

Now: $1,080.00
420 Bulkhead Steerer - 10 Tooth Sprocket - Tapered Shaft (Less Brake)

MSRP:

Was:

Now: $815.00
Compass Bolts 3.5" (set of 4)

MSRP:

Was:

Now: $20.00

Add to Cart
Single Lever Engine Control Handle, with Faceplate & Morse SL3 Mechanism

MSRP:

Was:

Now: $524.00

Add to Cart
Drop Leaf Table Hook Lock

MSRP:

Was:

Now: $12.00

Add to Cart
Stainless Key Stock - 6" Length, 1/4" x 1/4" (684-250)

MSRP:

Was:

Now: $24.00

Add to Cart
Edson 336 Pedestal Wheel Nut for Tapered Shafts (960-A-2105)

MSRP:

Was:

Now: $31.00

Add to Cart
10" Aluminum Sheave with Needle Bearings (ONLY)

MSRP:

Was:

Now: $441.00

Add to Cart
Flat Bronze Sheave Assembly - 8" Bronze Sheave

MSRP:

Was:

Now: $1,184.00

Add to Cart
Bronze Rudder Post Stuffing Box - 1.660" ID

MSRP:

Was:

Now: $252.00

Add to Cart
Upright Conduit Idler with Needle Bearings - 8" Sheave

MSRP:

Was:

Now: $463.00

Add to Cart
Chain & Wire Kit - 2S2B13 (77113)

MSRP:

Was:

Now: $368.00

Add to Cart
Chrome Hub for 28-inch to 34-inch Dia. Wheels

MSRP:

Was:

Now: $1,055.00

Add to Cart
34-inch Classic Teak Yacht Wheel with Teak Rim with 1-inch Straight Hub

MSRP:

Was:

Now: $4,987.00
Chain & Wire Kit - 2S2B22 (77114)

MSRP:

Was:

Now: $412.00

Add to Cart
Chain and Wire Kit 26' of 3/16" Wire (77116)

MSRP:

Was:

Now: $448.00

Add to Cart
Chain & Wire Kit - 2S25B22 (77123)

MSRP:

Was:

Now: $494.00

Add to Cart
Chain & Wire Kit - 2S25B13 (77121)

MSRP:

Was:

Now: $419.00

Add to Cart
Chain & Wire Kit - 2S25B9 (77119)

MSRP:

Was:

Now: $425.00

Add to Cart
Chain & Wire Kit - 2S25B7 (77117)

MSRP:

Was:

Now: $401.00

Add to Cart
Compass Bolts 1" (set of 4)

MSRP:

Was:

Now: $18.00

Add to Cart
Replacement Cover and Lockout Button for 910 control

MSRP:

Was:

Now: $24.00

Add to Cart

Chrome Hub for 20-inch to 26-inch Dia. Wheels

With Edson's Wheel Chrome Wheel Hub for 20”-26” Diameter Wheels you can make your own traditional mahogany or teak wheels! Using a two piece design, it allows you to assemble your wheel easily. Chrome Hub 667CH-2 has a outside diameter...

MSRP:

Was:

Now: $933.00

Add to Cart
30-inch Classic Teak Yacht Wheel with Teak Rim with 1-inch Straight Hub

Edson's Classic Teak Yacht Wheel is the true original! In production for over 125 years, this is a wheel that belongs on any classic yacht or stately passage-maker. Handcrafted to the highest offshore-quality standards, and will provide years...

MSRP:

Was:

Now: $4,635.00
418 Bulkhead Steerer - 10 Tooth Sprocket - Tapered Shaft (Less Brake)

Edson's 418 Bulkhead Steerer is lightweight, versatile and rugged. For use on performance and cruising boats alike. Edson’s Bulkhead Steerers feature Stainless Steel Needle Bearings to reduce friction, all stainless construction and the ability...

MSRP:

Was:

Now: $1,080.00
420 Bulkhead Steerer - 10 Tooth Sprocket - Tapered Shaft (Less Brake)

Designed for boats with built-in pedestal consoles, Edson’s new Bulkhead Steerer features easy installation, Edson’s super-sensitive Stainless Needle Bearings, all-stainless construction and the ability to mount a Wheel Flange Adapter. ...

MSRP:

Was:

Now: $815.00
Compass Bolts 3.5" (set of 4)

3.5" compass bolts (1/4"-20) with nylon washers and Teflon-based corrosion inhibitor.Sold as a set of four bolts. Use these bolts for installing a compass on an Edson classic pedestal on top of an Edson engine control.

MSRP:

Was:

Now: $20.00

Add to Cart
Single Lever Engine Control Handle, with Faceplate & Morse SL3 Mechanism

Edson Single Lever Engine Handle, Faceplate and Morse SL3 Mechanism are also available alone for bulkhead mounting. Single Lever for intuitive Control Utilizes Series 33 Control Cables Neutral Lock Out Mechanism Revs Engine for Battery Charging Can...

MSRP:

Was:

Now: $524.00

Add to Cart
Drop Leaf Table Hook Lock

Edson’s Teak and Poly Drop Leaf Tables use a stainless steel hook lock to keep the table from folding open while in the down position. Edson's A-1340 Universal Clamp-On Table Mounting Hardware will replace any old, broken or...

MSRP:

Was:

Now: $12.00

Add to Cart
Stainless Key Stock - 6" Length, 1/4" x 1/4" (684-250)

Stainless Key Stock is 6-inches in length with a width and depth of 1/4-inches.

MSRP:

Was:

Now: $24.00

Add to Cart
Edson 336 Pedestal Wheel Nut for Tapered Shafts (960-A-2105)

For #336 Pedestal with Through Shaft Brake and Tapered shaft.

MSRP:

Was:

Now: $31.00

Add to Cart
10" Aluminum Sheave with Needle Bearings (ONLY)

Edson’s Sheaves may be the answer in many areas of custom boat building, not only for steering but also for centerboards, custom deck hardware, or remote actuators, such as emergency shut off valves and CO2 systems. Great care should be...

MSRP:

Was:

Now: $441.00

Add to Cart
Flat Bronze Sheave Assembly - 8" Bronze Sheave

Edson’s Flat Sheave Assembly will allow you to turn steering cable around a sheave in tight areas where vertical assemblies normally wouldn't fit. Constructed of Bronze sheaves and housing, it is designed to be mounted to a flat...

MSRP:

Was:

Now: $1,184.00

Add to Cart
Bronze Rudder Post Stuffing Box - 1.660" ID

Edson's Rudder Post Stuffing Box combines a rudder post bearing with an above-the-waterline stuffing box for. We recommend fiberglassing the stuffing box/bearing to the top of the tubing when the rudder post is in place. This can be done easily using...

MSRP:

Was:

Now: $252.00

Add to Cart
Upright Conduit Idler with Needle Bearings - 8" Sheave

Upright Conduit Idlers allow you to turn steering cable around a sheave rather than through the conduit, reducing wear and needle bearings for less friction. Upright Conduit Idlers are an absolute must on boats over 39’ (12m)...

MSRP:

Was:

Now: $463.00

Add to Cart
Chain & Wire Kit - 2S2B13 (77113)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $368.00

Add to Cart
Chrome Hub for 28-inch to 34-inch Dia. Wheels

With Edson's Wheel Chrome Wheel Hub for 28”-34” Diameter Wheels you can make your own traditional mahogany or teak wheels! Using a two piece design, it allows you to assemble your wheel easily. Chrome Hub 667CH-4 has a outside diameter...

MSRP:

Was:

Now: $1,055.00

Add to Cart
34-inch Classic Teak Yacht Wheel with Teak Rim with 1-inch Straight Hub

Edson's Classic Teak Yacht Wheel is the true original! In production for over 125 years, this is a wheel that belongs on any classic yacht or stately passage-maker. Handcrafted to the highest offshore-quality standards, and will provide years...

MSRP:

Was:

Now: $4,987.00
Chain & Wire Kit - 2S2B22 (77114)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $412.00

Add to Cart
Chain and Wire Kit 26' of 3/16" Wire (77116)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $448.00

Add to Cart
Chain & Wire Kit - 2S25B22 (77123)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $494.00

Add to Cart
Chain & Wire Kit - 2S25B13 (77121)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $419.00

Add to Cart
Chain & Wire Kit - 2S25B9 (77119)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $425.00

Add to Cart
Chain & Wire Kit - 2S25B7 (77117)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $401.00

Add to Cart
Compass Bolts 1" (set of 4)

1" compass bolts (1/4"-20) with nylon washers and Teflon-based corrosion inhibitor.Sold as a set of four bolts. Use these bolts for installing a compass directly on top of an Edson classic pedestal (without an engine control).

MSRP:

Was:

Now: $18.00

Add to Cart
Replacement Cover and Lockout Button for 910 control

Edson Replacement Cover and Lockout Button for 910 Morse control. To prevent loosing cover and button add a beed of silicon to the outside edge of the rubber cover.

MSRP:

Was:

Now: $24.00

Add to Cart

Shop