Sta-Plug is a soft, cone shaped plug designed to conform to the irregular and unpredictable shapes of a hull breach - controlling the flow of water while you pump.
Whether it's a round hole caused by mechanical failure, or an elongated tear due to impact, Sta-Plug adapts to slow or stop the leak. Unlike old fashioned wooden plugs, Sta-Plug's unique shape allow it to be compressed by hand or cut to fit. It also gets in the hard-to-reach locations and can also be pushed into a gap using a screw driver or similar tool.
Dimensions: 5 inches x 9 inches. The Sta-Plug is suitable for holes up to four inches in diameter.
One Sta-Plug for every 10 feet of boat length is recommended. For boats under 30’ we recommend two Sta-Plugs and a minimum of three for any boat in excess of 30’. This allows one Sta-Plug for a thru-hull/hose failure and provides spares for other holes or to cut in the event of a hull impact breach.
The Sta-Plug is constructed of proprietary special purpose foam and coated with a flexible sealer adding strength and color.