Shop - Sailboat Steering - Service Parts

Here you will find Edson sailboat steering hardware, which includes chain & kire kits, pull-pull conduit steering, chain sprockets and much more. For more information about which products are right for your application, please see our support section for boat-specific data sheets, how-to videos and other helpful resources. Our blog section contains many helpful articles, including an in-depth discussion of achieving correct steering cable tension.

Stainless Single Hub Sprocket - 11 Tooth for 5/8” #50 Chain (636-2-11-SS)

MSRP:

Was:

Now: $354.00

Add to Cart
Flax Packing for Stuffing Boxes

MSRP:

Was:

Now: $21.00

Add to Cart
Conduit & Bearing Lubricant - 3oz tube of Teflon Grease

MSRP:

Was:

Now: $20.00

Add to Cart
Transom Mount Conduit Bracket

MSRP:

Was:

Now: $235.00

Add to Cart
Flat Conduit Idler - 4" Sheave

MSRP:

Was:

Now: $223.00

Add to Cart
3/4" Pull/Pull Conduit by the Foot for 3/16" and 1/4" Wire Rope

MSRP:

Was:

Now: $20.00

Add to Cart
Chain & Wire Kit - 2S15B7 (77101)

MSRP:

Was:

Now: $317.00

Add to Cart
Chain & Wire Kit - 2S15B9 (77102)

MSRP:

Was:

Now: $309.00

Add to Cart
Tether-Style Rudder Stop (862-WIRE)

MSRP:

Was:

Now: $97.00

Add to Cart
4" Aluminum Hex Head Pedestal Bolt (646-4HEX)

MSRP:

Was:

Now: $9.00

Add to Cart
Drive Pin (pkg of 2) (960-A-95A)

MSRP:

Was:

Now: $9.00

Add to Cart
4” Aluminum Sheave (ONLY)

MSRP:

Was:

Now: $107.00

Add to Cart
Single Upright Bronze Sheave Assembly - 6" Sheave

MSRP:

Was:

Now: $317.00

Add to Cart
Adjustable Crossed-Wire Idler - 6" Sheave

MSRP:

Was:

Now: $538.00

Add to Cart
Adjustable Idler - 6" Aluminum Sheave

MSRP:

Was:

Now: $558.00

Add to Cart
Double Articu-Lock Sheave Assembly - 6" Aluminum Sheave

MSRP:

Was:

Now: $557.00

Add to Cart
Stainless Steel Double Hub Sprocket - 11 Tooth for 5/8” #50 Chain (Side Mount Brake) (855-2-11SB)

MSRP:

Was:

Now: $294.00

Add to Cart
Bronze Rudder Post Stuffing Box - 1" ID

MSRP:

Was:

Now: $244.00

Add to Cart
Conduit & Bearing Lubricant - 14oz tube of Teflon Grease

MSRP:

Was:

Now: $39.00

Add to Cart
12" Conduit Bracket with Rudderstop

MSRP:

Was:

Now: $223.00

Add to Cart
Flat Conduit Idler - 6" Sheave

MSRP:

Was:

Now: $268.00

Add to Cart
7/8" Pull/Pull Conduit by the Foot for 5/16" Wire Rope

MSRP:

Was:

Now: $54.00

Add to Cart
Chain & Wire Kit - 2S15B9 (77103)

MSRP:

Was:

Now: $335.00

Add to Cart
Shelf Steerer (408) Rebuild Kit (314-408)

MSRP:

Was:

Now: $127.00

Add to Cart

Stainless Single Hub Sprocket - 11 Tooth for 5/8” #50 Chain (636-2-11-SS)

When space is limited, use Edson's non-magneticSingle Hub Sprockets. With the hub on one side, the sprocket takes up less space within the pedestal head. These sprockets accept American Standard Roller Chains. Part Number Material Hub...

MSRP:

Was:

Now: $354.00

Add to Cart
Flax Packing for Stuffing Boxes

Waxed Flax packing for re-lining your stuffing box. 3/8” square x 16.5” long for rudderposts up to 4.5" diameter. Easily cut to fit for smaller rudderposts.

MSRP:

Was:

Now: $21.00

Add to Cart
Conduit & Bearing Lubricant - 3oz tube of Teflon Grease

Edson’s Conduit Lubricant is a Teflon grease for use in all Edson Systems. Ideal for both conduit and needle bearing use. 827-3 Conduit Lubricant - 3oz tube of Teflon Grease !WARNING! DO NOT USE PETROLEUM BASED GREASE...

MSRP:

Was:

Now: $20.00

Add to Cart
Transom Mount Conduit Bracket

Edson's Transom Mount Conduit Bracket is ideal for terminating the conduits at the quadrant when there are no bulkheads to utilize. It is easily bolted through he cockpit sole, this 24" Transom Mount version is used with Edson's Small Boat Steerer or...

MSRP:

Was:

Now: $235.00

Add to Cart
Flat Conduit Idler - 4" Sheave

Edson’s Flat Conduit Idler allow you to turn steering cable around a sheave rather than through the conduit, reducing wear and friction. Constructed of anodized Aluminum sheaves and a Brass housing, it is designed to be mounted to a...

MSRP:

Was:

Now: $223.00

Add to Cart
3/4" Pull/Pull Conduit by the Foot for 3/16" and 1/4" Wire Rope

Edson Pull-Pull Conduit Systems are designed to provide the ability to run steering cables around spaces or structures that otherwise might be difficult or impossible with straight wire runs from sheave to sheave. Pull-Pull System components have...

MSRP:

Was:

Now: $20.00

Add to Cart
Chain & Wire Kit - 2S15B7 (77101)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $317.00

Add to Cart
Chain & Wire Kit - 2S15B9 (77102)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $309.00

Add to Cart
Tether-Style Rudder Stop (862-WIRE)

Edson's Tether-Style Rudder Stop is designed to limit the swing of your rudder, preventing costly damage from the rudder shock loading the steering system. Includes 6' of 2.5mm Dyneema rope to be spliced or tied to the radial and a...

MSRP:

Was:

Now: $97.00

Add to Cart
4" Aluminum Hex Head Pedestal Bolt (646-4HEX)

Since 1987, all Edson Pedestals use the exclusive Edson Hex Head Aluminum Bolts. With this improvement they lock in place and require only one person to tighten them. They fit flush with the base and the aluminum alloy is the same as the base thus...

MSRP:

Was:

Now: $9.00

Add to Cart
Drive Pin (pkg of 2) (960-A-95A)

Edson's Drive Pin (960-A-95A) is designed for Edson's 335 Pedestals (Edson's Side Brake Model). Includes 2 drive pins.

MSRP:

Was:

Now: $9.00

Add to Cart
4” Aluminum Sheave (ONLY)

Edson’s Sheaves may be the answer in many areas of custom boat building, not only for steering but also for centerboards, custom deck hardware, or remote actuators, such as emergency shut off valves and CO2 systems. Great care should be...

MSRP:

Was:

Now: $107.00

Add to Cart
Single Upright Bronze Sheave Assembly - 6" Sheave

Edson’s Single Upright Bronze Sheave Assembly with a 6" Sheave are specially designed for use in wire rope steering systems for sailboats. The Aluminum Sheaves are ideal for the performance boat that requires sensitive, lightweight steering...

MSRP:

Was:

Now: $317.00

Add to Cart
Adjustable Crossed-Wire Idler - 6" Sheave

Edson’s Adjustable Crossed-Wire Idler - for use on boats where the quadrant is aft of the rudder post or on Radial Drive Steering Systems when the pedestal is located forward of the rudder post. This exclusive Edson design crosses the wire...

MSRP:

Was:

Now: $538.00

Add to Cart
Adjustable Idler - 6" Aluminum Sheave

Edson’s Adjustable Idler - designed for boats having the quadrant on the forward side of the rudder post, and the pedestal either forward or aft of the rudder post. They can be used for Radial Drive Steering Systems when the pedestal is located aft...

MSRP:

Was:

Now: $558.00

Add to Cart
Double Articu-Lock Sheave Assembly - 6" Aluminum Sheave

Edson’s Articu-Lock Sheaves – Ideal for performance sailboats, cruising/racing catamarans and high-tech cruising yachts above 27 feet. Edson engineers have designed this new sheave to be lightweight, strong and extremely easy to align and...

MSRP:

Was:

Now: $557.00

Add to Cart
Stainless Steel Double Hub Sprocket - 11 Tooth for 5/8” #50 Chain (Side Mount Brake) (855-2-11SB)

Use Edson's double hub sprockets when space will allow; their extra length will spread the load. They are the same as the single hub sprockets but have a hub on both sides of the sprocket teeth with one side knurled for a brake. The Double Hub Sprocket...

MSRP:

Was:

Now: $294.00

Add to Cart
Bronze Rudder Post Stuffing Box - 1" ID

Edson's Rudder Post Stuffing Box combines a rudder post bearing with an above-the-waterline stuffing box for. We recommend fiberglassing the stuffing box/bearing to the top of the tubing when the rudder post is in place. This can be done easily using...

MSRP:

Was:

Now: $244.00

Add to Cart
Conduit & Bearing Lubricant - 14oz tube of Teflon Grease

Edson’s Conduit Lubricant is a Teflon grease for use in all Edson Systems. Ideal for both conduit and needle bearing use. 827-14 Conduit Lubricant - 14oz tube of Teflon Grease !WARNING! DO NOT USE PETROLEUM BASED GREASE ON...

MSRP:

Was:

Now: $39.00

Add to Cart
12" Conduit Bracket with Rudderstop

Pull-Pull Conduit Bracket with Rudderstop is ideal for terminating the conduits at the quadrant when there are no bulkheads to utilize. It is easily bolted through the cockpit sole and comes with its own rudderstop post. Edson’s #824-12...

MSRP:

Was:

Now: $223.00

Add to Cart
Flat Conduit Idler - 6" Sheave

Edson’s Flat Conduit Idler allow you to turn steering cable around a sheave rather than through the conduit, reducing wear and friction. Constructed of anodized Aluminum sheaves and a Brass housing, it is designed to be mounted to a...

MSRP:

Was:

Now: $268.00

Add to Cart
7/8" Pull/Pull Conduit by the Foot for 5/16" Wire Rope

Edson Pull-Pull Conduit Systems are designed to provide the ability to run steering cables around spaces or structures that otherwise might be difficult or impossible with straight wire runs from sheave to sheave. Pull-Pull System components have...

MSRP:

Was:

Now: $54.00

Add to Cart
Chain & Wire Kit - 2S15B9 (77103)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $335.00

Add to Cart
Shelf Steerer (408) Rebuild Kit (314-408)

Maintain your Edson 408 Shelf Steerer with a rebuild kit that includes all the replaceable components along the wheel shaft, including needle bearings. The steerer shaft needle bearings have a +/- 20 year lifespan assuming proper maintenance, and worn...

MSRP:

Was:

Now: $127.00

Add to Cart