null

Edson's Holiday Schedule: closing at 12pm EST 12/20 and 12/24, closed 12/25 and 1/1. 

Service Parts

Here you will find Edson sailboat steering hardware, which includes chain & kire kits, pull-pull conduit steering, chain sprockets and much more. For more information about which products are right for your application, please see our support section for boat-specific data sheets, how-to videos and other helpful resources. Our blog section contains many helpful articles, including an in-depth discussion of achieving correct steering cable tension.




  • Flax Packing for Stuffing Boxes Flax Packing for Stuffing Boxes Flax Packing for Stuffing Boxes

    Flax Packing for Stuffing Boxes

    Waxed Flax packing for re-lining your stuffing box.  3/8” square x 16.5” long for rudderposts up to 4.5" diameter. Easily cut to fit for smaller rudderposts.

    $21.00
  • Transom Mount Conduit Bracket Transom Mount Conduit Bracket

    Transom Mount Conduit Bracket

    Edson's Transom Mount Conduit Bracket is ideal for terminating the conduits at the quadrant when there are no bulkheads to utilize. It is easily bolted through he cockpit sole, this 24" Transom Mount version is used with Edson's Small Boat Steerer or...

    $235.00
  • Flat Conduit Idler - 4" Sheave Flat Conduit Idler - 4" Sheave

    Flat Conduit Idler - 4" Sheave

    Edson’s Flat Conduit Idler allow you to turn steering cable around a sheave rather than through the conduit, reducing wear and friction. Constructed of anodized Aluminum sheaves and a Brass housing, it is designed to be mounted to a...

    $223.00
  • Chain & Wire Kit - 2S15B7 (77101) Chain & Wire Kit - 2S15B7 (77101) Chain & Wire Kit - 2S15B7 (77101) Chain & Wire Kit - 2S15B7 (77101) Chain & Wire Kit - 2S15B7 (77101)

    Chain & Wire Kit - 2S15B7 (77101)

    Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

    $317.00
  • Chain & Wire Kit - 2S15B9 (77102) Chain & Wire Kit - 2S15B9 (77102)

    Chain & Wire Kit - 2S15B9 (77102)

    Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

    $309.00
  • Tether-Style Rudder Stop (862-WIRE)

    Tether-Style Rudder Stop (862-WIRE)

    Edson's Tether-Style Rudder Stop is designed to limit the swing of your rudder, preventing costly damage from the rudder shock loading the steering system. Includes 6' of 2.5mm Dyneema rope to be spliced or tied to the radial and a...

    $97.00
  • 4" Aluminum Hex Head Pedestal Bolt (646-4HEX)

    4" Aluminum Hex Head Pedestal Bolt (646-4HEX)

    Since 1987, all Edson Pedestals use the exclusive Edson Hex Head Aluminum Bolts. With this improvement they lock in place and require only one person to tighten them. They fit flush with the base and the aluminum alloy is the same as the base thus...

    $9.00
  • 4” Aluminum Sheave (ONLY) 4” Aluminum Sheave (ONLY)

    4” Aluminum Sheave (ONLY)

    Edson’s sheaves may be the answer in many areas of custom boat building, not only for steering but also for centerboards, custom deck hardware, or remote actuators, such as emergency shut off valves and CO2 systems. Great care should be taken to...

    $107.00
  • Single Upright Bronze Sheave Assembly - 6" Sheave

    Single Upright Bronze Sheave Assembly - 6" Sheave

    Edson’s Single Upright Bronze Sheave Assembly with a 6" Sheave are specially designed for use in wire rope steering systems for sailboats. The Aluminum Sheaves are ideal for the performance boat that requires sensitive, lightweight steering...

    $317.00
  • Adjustable Crossed-Wire Idler - 6" Sheave

    Adjustable Crossed-Wire Idler - 6" Sheave

    Edson’s Adjustable Crossed-Wire Idler - for use on boats where the quadrant is aft of the rudder post or on Radial Drive Steering Systems when the pedestal is located forward of the rudder post.  This exclusive Edson design crosses the wire...

    $538.00
  • Adjustable Idler  - 6" Aluminum Sheave

    Adjustable Idler - 6" Aluminum Sheave

    Edson’s Adjustable Idler - designed for boats having the quadrant on the forward side of the rudder post, and the pedestal either forward or aft of the rudder post. They can be used for Radial Drive Steering Systems when the pedestal is located aft...

    $558.00
  • Bronze Rudder Post Stuffing Box - 1" ID Bronze Rudder Post Stuffing Box - 1" ID Bronze Rudder Post Stuffing Box - 1" ID

    Bronze Rudder Post Stuffing Box - 1" ID

    Edson's Rudder Post Stuffing Box combines a rudder post bearing with an above-the-waterline stuffing box for. We recommend fiberglassing the stuffing box/bearing to the top of the tubing when the rudder post is in place. This can be done easily using...

    $244.00
  • 12" Conduit Bracket with Rudderstop 12" Conduit Bracket with Rudderstop

    12" Conduit Bracket with Rudderstop

    Pull-Pull Conduit Bracket with Rudderstop is ideal for terminating the conduits at the quadrant when there are no bulkheads to utilize. It is easily bolted through the cockpit sole and comes with its own rudderstop post.  Edson’s #824-12...

    $223.00
  • Flat Conduit Idler - 6" Sheave Flat Conduit Idler - 6" Sheave

    Flat Conduit Idler - 6" Sheave

    Edson’s Flat Conduit Idler allow you to turn steering cable around a sheave rather than through the conduit, reducing wear and friction. Constructed of anodized Aluminum sheaves and a Brass housing, it is designed to be mounted to a...

    $268.00
  • Chain & Wire Kit - 2S15B9 (77103) Chain & Wire Kit - 2S15B9 (77103) Chain & Wire Kit - 2S15B9 (77103) Chain & Wire Kit - 2S15B9 (77103) Chain & Wire Kit - 2S15B9 (77103)

    Chain & Wire Kit - 2S15B9 (77103)

    Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

    $335.00
  • Shelf Steerer (408) Rebuild Kit (314-408)

    Shelf Steerer (408) Rebuild Kit (314-408)

    Maintain your Edson 408 Shelf Steerer with a rebuild kit that includes all the replaceable components along the wheel shaft, including needle bearings. The steerer shaft needle bearings have a +/- 20 year lifespan assuming proper maintenance, and worn...

    $127.00