Products - Page 5

Steering hardware, wheels, accessories, electronic mounts, and pumps highlight what Edson has to offer in this complete catalog of products.

Sailboat Steering Systems & Steering Wheels

Sailboat Pedestal & Cockpit Accessories

Power Boat Steering Wheels & PowerKnobs

Electronics Mounting Systems

Marine Accessories for Power Boats and Sailboats

Marine Manual Pumps for Power Boats & Sailboats

Vision Series Compass Bowl for 5" Dial Compasses

MSRP:

Was:

Now: $304.00

Add to Cart
Stainless Top Plate - 8" for 400,402 & 464 Pedestals

MSRP:

Was:

Now: $186.00

Add to Cart
Pedestal Guard Pipe Only - 1-1/8" - Angled 58"

MSRP:

Was:

Now: $456.00

Add to Cart
Pedestal Guard Kit - 58" Angled Guard - 6-7/8" Top Plate

MSRP:

Was:

Now: $596.00

Add to Cart
Engine Control Decal

MSRP:

Was:

Now: $5.00

Add to Cart
Engine Control Cable - 33 Series Cable - 8'

MSRP:

Was:

Now: $46.00

Add to Cart
Stainless Clutch Handle

MSRP:

Was:

Now: $88.00

Add to Cart
Single Lever Engine Control for Edson Pedestal #402 with 58" Straight Guard

MSRP:

Was:

Now: $1,618.00

Add to Cart
Standard Clutch and Throttle Control - 8"

MSRP:

Was:

Now: $585.00

Add to Cart
Hardware Kit for Luncheon Table - Guard Mount with 9.5" Guard Spacing

MSRP:

Was:

Now: $303.00

Add to Cart
Wheel Storage Rail Mount – Straight Hub (Device Only)

MSRP:

Was:

Now: $169.00

Add to Cart
Tether-Style Rudder Stop

MSRP:

Was:

Now: $97.00

Add to Cart
4" Aluminum Hex Head Pedestal Bolt

MSRP:

Was:

Now: $9.00

Add to Cart
Drive Pin - Package of 2

MSRP:

Was:

Now: $9.00

Add to Cart
4” Aluminum Sheave (ONLY)

MSRP:

Was:

Now: $107.00

Add to Cart
Single Upright Bronze Sheave Assembly - 6" Sheave

MSRP:

Was:

Now: $317.00

Add to Cart
Adjustable Crossed-Wire Idler - 6" Sheave

MSRP:

Was:

Now: $538.00

Add to Cart
Adjustable Idler - 6" Aluminum Sheave

MSRP:

Was:

Now: $558.00

Add to Cart
Bronze Tiller Head Fitting for 1.25" - 1.50" Dia. Rudder Post

MSRP:

Was:

Now: $845.00

Choose Options
Stainless Steel Double Hub Sprocket - 11 Tooth for 5/8” #50 Chain (Side Mount Brake)

MSRP:

Was:

Now: $294.00

Add to Cart
Bronze Rudder Post Stuffing Box - 1" ID

MSRP:

Was:

Now: $244.00

Add to Cart
Conduit & Bearing Lubricant - 14oz tube of Teflon Grease

MSRP:

Was:

Now: $39.00

Add to Cart
12" Conduit Bracket with Rudderstop

MSRP:

Was:

Now: $223.00

Add to Cart
Flat Conduit Idler - 6" Sheave

MSRP:

Was:

Now: $268.00

Add to Cart

Vision Series Compass Bowl for 5" Dial Compasses

Edson’s Compass Bowl allows the mounting of a 5" Dial flush-mount compass between the guard pipes. Ideal for installations where there is limited space on the pedestal for the compass or the compass needs to be mounted away from instruments that...

MSRP:

Was:

Now: $304.00

Add to Cart
Stainless Top Plate - 8" for 400,402 & 464 Pedestals

Edson’s Stainless Top Plate - 8" for 400,402 & 464 Pedestals is made of Investment-cast 316 Stainless and polished to a mirror finish. It will accommodate 1”, 1-1/8” and 1-1/4” pedestal guard tubing on 9-1/2”...

MSRP:

Was:

Now: $186.00

Add to Cart
Pedestal Guard Pipe Only - 1-1/8" - Angled 58"

Replacement Pedestal Guard Pipe for 58" Tall, Angled, 1-1/8" diameter guard tubing only. This version is for Edson #335, 336 and 337 Pedestals & #400, 402, 464 CDi Pedestals Does not include Top Plate or Mounting Feet.

MSRP:

Was:

Now: $456.00

Add to Cart
Pedestal Guard Kit - 58" Angled Guard - 6-7/8" Top Plate

Edson's Angled Pedestal Guard Kit gives you extra room to install Instrument Housings, Radar Pods or multiple displays while the new angle increases their visibility.Edson Pedestal Guard Kit includes Stainless Guard Pipe, Top Plate and Mounting Feet...

MSRP:

Was:

Now: $596.00

Add to Cart
Engine Control Decal

A red decal on your engine controls provides you and your guests with instructions at a glance. It is supplied with all new controls. Order a replacement if yours has become unreadable. Works for all engine controls.

MSRP:

Was:

Now: $5.00

Add to Cart
Engine Control Cable - 33 Series Cable - 8'

The proper engine control cables will have a dramatic effect on the performance of your engine control. Edson carries only premium high-efficiency cables that feature a coiled inner core that can take bends much better than solid core cables. 33 Series...

MSRP:

Was:

Now: $46.00

Add to Cart
Stainless Clutch Handle

Upgrade your older Edson controls with these stainless replacements. Highly polished, marked “Fwd-Rev”. Can be easily retrofitted onto existing Edson engine controls. Includes mounting screw.IMPORTANT: These handles are only for Edson's Dual...

MSRP:

Was:

Now: $88.00

Add to Cart
Single Lever Engine Control for Edson Pedestal #402 with 58" Straight Guard

Edson’s Single Lever Engine Control for Edson Pedestal #402 with 58" Straight Guard provides simple, safe, one-handed operation while maneuvering your boat under power. Mounted on the Pedestal with the 58" Straight 1-1⁄8”...

MSRP:

Was:

Now: $1,618.00

Add to Cart
Standard Clutch and Throttle Control - 8"

Edson’s Standard Clutch and Throttle Control features matching stainless control handles which are conveniently located on each side of the pedestal and are clearly marked for “Forward” and “Reverse”, “Fast”...

MSRP:

Was:

Now: $585.00

Add to Cart
Hardware Kit for Luncheon Table - Guard Mount with 9.5" Guard Spacing

Edson’s “Hardware Only” Kits are for the handyman who wishes to design and build his own cockpit table or accessories based on Edson’s tried and true designs. All kits are complete with instructions and stainless hardware...

MSRP:

Was:

Now: $303.00

Add to Cart
Wheel Storage Rail Mount – Straight Hub (Device Only)

Make more room in your cockpit when you’re not sailing! Enjoy a large wheel when sailing but it takes up too much room in the cockpit when you are at anchor or at the dock? Take your wheel off and store it out of the way with Edson’s Wheel...

MSRP:

Was:

Now: $169.00

Add to Cart
Tether-Style Rudder Stop

Edson's Tether-Style Rudder Stop is designed to limit the swing of your rudder, preventing costly damage from the rudder shock loading the steering system. Includes 6' of 2.5mm Dyneema rope to be spliced or tied to the radial and a...

MSRP:

Was:

Now: $97.00

Add to Cart
4" Aluminum Hex Head Pedestal Bolt

Since 1987, all Edson Pedestals use the exclusive Edson Hex Head Aluminum Bolts. With this improvement they lock in place and require only one person to tighten them. They fit flush with the base and the aluminum alloy is the same as the base thus...

MSRP:

Was:

Now: $9.00

Add to Cart
Drive Pin - Package of 2

Edson's Drive Pin (960-A-95A) is designed for Edson's 335 Pedestals (Edson's Side Brake Model). Includes 2 drive pins.

MSRP:

Was:

Now: $9.00

Add to Cart
4” Aluminum Sheave (ONLY)

Edson’s Sheaves may be the answer in many areas of custom boat building, not only for steering but also for centerboards, custom deck hardware, or remote actuators, such as emergency shut off valves and CO2 systems. Great care should be...

MSRP:

Was:

Now: $107.00

Add to Cart
Single Upright Bronze Sheave Assembly - 6" Sheave

Edson’s Single Upright Bronze Sheave Assembly with a 6" Sheave are specially designed for use in wire rope steering systems for sailboats. The Aluminum Sheaves are ideal for the performance boat that requires sensitive, lightweight steering...

MSRP:

Was:

Now: $317.00

Add to Cart
Adjustable Crossed-Wire Idler - 6" Sheave

Edson’s Adjustable Crossed-Wire Idler - for use on boats where the quadrant is aft of the rudder post or on Radial Drive Steering Systems when the pedestal is located forward of the rudder post. This exclusive Edson design crosses the wire...

MSRP:

Was:

Now: $538.00

Add to Cart
Adjustable Idler - 6" Aluminum Sheave

Edson’s Adjustable Idler - designed for boats having the quadrant on the forward side of the rudder post, and the pedestal either forward or aft of the rudder post. They can be used for Radial Drive Steering Systems when the pedestal is located aft...

MSRP:

Was:

Now: $558.00

Add to Cart
Bronze Tiller Head Fitting for 1.25" - 1.50" Dia. Rudder Post

Edson’s Bronze Tiller Head Fittings have a classic look and feel that compliments both traditional and modern boats alike. 965BR-125-150 Tiller Head is designed for rudder posts with a diameter from 1.25-inches to 1.50-inches...

MSRP:

Was:

Now: $845.00

Choose Options
Stainless Steel Double Hub Sprocket - 11 Tooth for 5/8” #50 Chain (Side Mount Brake)

Use Edson's double hub sprockets when space will allow; their extra length will spread the load. They are the same as the single hub sprockets but have a hub on both sides of the sprocket teeth with one side knurled for a brake. The Double Hub Sprocket...

MSRP:

Was:

Now: $294.00

Add to Cart
Bronze Rudder Post Stuffing Box - 1" ID

Edson's Rudder Post Stuffing Box combines a rudder post bearing with an above-the-waterline stuffing box for. We recommend fiberglassing the stuffing box/bearing to the top of the tubing when the rudder post is in place. This can be done easily using...

MSRP:

Was:

Now: $244.00

Add to Cart
Conduit & Bearing Lubricant - 14oz tube of Teflon Grease

Edson’s Conduit Lubricant is a Teflon grease for use in all Edson Systems. Ideal for both conduit and needle bearing use. 827-14 Conduit Lubricant - 14oz tube of Teflon Grease !WARNING! DO NOT USE PETROLEUM BASED GREASE ON...

MSRP:

Was:

Now: $39.00

Add to Cart
12" Conduit Bracket with Rudderstop

Pull-Pull Conduit Bracket with Rudderstop is ideal for terminating the conduits at the quadrant when there are no bulkheads to utilize. It is easily bolted through the cockpit sole and comes with its own rudderstop post. Edson’s #824-12...

MSRP:

Was:

Now: $223.00

Add to Cart
Flat Conduit Idler - 6" Sheave

Edson’s Flat Conduit Idler allow you to turn steering cable around a sheave rather than through the conduit, reducing wear and friction. Constructed of anodized Aluminum sheaves and a Brass housing, it is designed to be mounted to a...

MSRP:

Was:

Now: $268.00

Add to Cart

Shop