Products - Page 12

Steering hardware, wheels, accessories, electronic mounts, and pumps highlight what Edson has to offer in this complete catalog of products.

Sailboat Steering Systems & Steering Wheels

Sailboat Pedestal & Cockpit Accessories

Power Boat Steering Wheels & PowerKnobs

Electronics Mounting Systems

Marine Accessories for Power Boats and Sailboats

Marine Manual Pumps for Power Boats & Sailboats

Chrome Hub for 28-inch to 34-inch Dia. Wheels

MSRP:

Was:

Now: $1,055.00

Add to Cart
34-inch Classic Teak Yacht Wheel with Teak Rim with 1-inch Straight Hub

MSRP:

Was:

Now: $4,987.00
Chain & Wire Kit - 2S2B22 (77114)

MSRP:

Was:

Now: $412.00

Add to Cart
Chain and Wire Kit 26' of 3/16" Wire

MSRP:

Was:

Now: $448.00

Add to Cart
Chain & Wire Kit - 2S25B22 (77123)

MSRP:

Was:

Now: $494.00

Add to Cart
Chain & Wire Kit - 2S25B13 (77121)

MSRP:

Was:

Now: $419.00

Add to Cart
Chain & Wire Kit - 2S25B9 (77119)

MSRP:

Was:

Now: $425.00

Add to Cart
Chain & Wire Kit - 2S25B7 (77117)

MSRP:

Was:

Now: $401.00

Add to Cart
Compass Bolts 1" (set of 4)

MSRP:

Was:

Now: $18.00

Add to Cart
Replacement Cover and Lockout Button for 910 control

MSRP:

Was:

Now: $24.00

Add to Cart
Stainless Steel Wire Clip

MSRP:

Was:

Now: $11.00

Add to Cart
Wheel Storage Rail Mount Kit – Straight Hub with Quick Release Nut

MSRP:

Was:

Now: $178.00

Add to Cart
Edson 336 Pedestal Wheel Nut for Straight Shafts

MSRP:

Was:

Now: $20.00

Add to Cart
10" Bronze Sheave with Needle Bearings (ONLY)

MSRP:

Was:

Now: $687.00

Add to Cart
Flat Aluminum Sheave Assembly - 10" Aluminum Sheave

MSRP:

Was:

Now: $908.00

Add to Cart
Bronze Rudder Post Stuffing Box - 1.75" ID

MSRP:

Was:

Now: $258.00

Add to Cart
8 foot length - 3/4" Pull/Pull Conduit for 3/16" and 1/4" Wire Rope (includes two end fittings)

MSRP:

Was:

Now: $223.00

Add to Cart
Chain & Wire Kit - 2S2B22 (77115)

MSRP:

Was:

Now: $438.00

Add to Cart
Chrome Hub for 36-inch to 42-inch Dia. Wheels

MSRP:

Was:

Now: $1,167.00

Add to Cart
38-inch Classic Teak Yacht Wheel with Teak Rim with 1-inch Straight Hub

MSRP:

Was:

Now: $4,891.00
Chain & Wire Kit - 2B2D9 (77200)

MSRP:

Was:

Now: $431.00

Add to Cart
Quadrant
Compass Light Wire - 10' Length

MSRP:

Was:

Now: $39.00

Add to Cart
Stainless Steel Hinge

MSRP:

Was:

Now: $36.00

Add to Cart

Chrome Hub for 28-inch to 34-inch Dia. Wheels

With Edson's Wheel Chrome Wheel Hub for 28”-34” Diameter Wheels you can make your own traditional mahogany or teak wheels! Using a two piece design, it allows you to assemble your wheel easily. Chrome Hub 667CH-4 has a outside diameter...

MSRP:

Was:

Now: $1,055.00

Add to Cart
34-inch Classic Teak Yacht Wheel with Teak Rim with 1-inch Straight Hub

Edson's Classic Teak Yacht Wheel is the true original! In production for over 125 years, this is a wheel that belongs on any classic yacht or stately passage-maker. Handcrafted to the highest offshore-quality standards, and will provide years...

MSRP:

Was:

Now: $4,987.00
Chain & Wire Kit - 2S2B22 (77114)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $412.00

Add to Cart
Chain and Wire Kit 26' of 3/16" Wire

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $448.00

Add to Cart
Chain & Wire Kit - 2S25B22 (77123)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $494.00

Add to Cart
Chain & Wire Kit - 2S25B13 (77121)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $419.00

Add to Cart
Chain & Wire Kit - 2S25B9 (77119)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $425.00

Add to Cart
Chain & Wire Kit - 2S25B7 (77117)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $401.00

Add to Cart
Compass Bolts 1" (set of 4)

1" compass bolts (1/4"-20) with nylon washers and Teflon-based corrosion inhibitor.Sold as a set of four bolts. Use these bolts for installing a compass directly on top of an Edson classic pedestal (without an engine control).

MSRP:

Was:

Now: $18.00

Add to Cart
Replacement Cover and Lockout Button for 910 control

Edson Replacement Cover and Lockout Button for 910 Morse control. To prevent loosing cover and button add a beed of silicon to the outside edge of the rubber cover.

MSRP:

Was:

Now: $24.00

Add to Cart
Stainless Steel Wire Clip

Edson’s Teak and Poly Drop Leaf and Luncheon Tables use a Stainless Steel Wire Clip attached to the bottom of the table that secures the Wire Form that acts as a table leg keeping the table from folding down while in use...

MSRP:

Was:

Now: $11.00

Add to Cart
Wheel Storage Rail Mount Kit – Straight Hub with Quick Release Nut

Make more room in your cockpit when you’re not sailing! Enjoy a large wheel when sailing but it takes up too much room in the cockpit when you are at anchor or at the dock? Take your wheel off and store it out of the way with Edson’s Wheel...

MSRP:

Was:

Now: $178.00

Add to Cart
Edson 336 Pedestal Wheel Nut for Straight Shafts

For #336 Pedestal with Through Shaft Brake and Straight shaft. 1"-14 nut size.

MSRP:

Was:

Now: $20.00

Add to Cart
10" Bronze Sheave with Needle Bearings (ONLY)

Edson’s Sheaves may be the answer in many areas of custom boat building, not only for steering but also for centerboards, custom deck hardware, or remote actuators, such as emergency shut off valves and CO2 systems. Great care should be...

MSRP:

Was:

Now: $687.00

Add to Cart
Flat Aluminum Sheave Assembly - 10" Aluminum Sheave

Edson’s Flat Sheave Assembly will allow you to turn steering cable around a sheave in tight areas where vertical assemblies normally wouldn't fit. Constructed of anodized Aluminum sheaves and housing, it is designed to be mounted to...

MSRP:

Was:

Now: $908.00

Add to Cart
Bronze Rudder Post Stuffing Box - 1.75" ID

Edson's Rudder Post Stuffing Box combines a rudder post bearing with an above-the-waterline stuffing box for. We recommend fiberglassing the stuffing box/bearing to the top of the tubing when the rudder post is in place. This can be done easily using...

MSRP:

Was:

Now: $258.00

Add to Cart
8 foot length - 3/4" Pull/Pull Conduit for 3/16" and 1/4" Wire Rope (includes two end fittings)

Edson Pull-Pull Conduit Systems are designed to provide the ability to run steering cables around spaces or structures that otherwise might be difficult or impossible with straight wire runs from sheave to sheave. Pull-Pull System components have...

MSRP:

Was:

Now: $223.00

Add to Cart
Chain & Wire Kit - 2S2B22 (77115)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $438.00

Add to Cart
Chrome Hub for 36-inch to 42-inch Dia. Wheels

With Edson's Wheel Chrome Wheel Hub for 36”-42” Diameter Wheels you can make your own traditional mahogany or teak wheels! Using a two piece design, it allows you to assemble your wheel easily. Chrome Hub 667CH-6 has a outside diameter...

MSRP:

Was:

Now: $1,167.00

Add to Cart
38-inch Classic Teak Yacht Wheel with Teak Rim with 1-inch Straight Hub

Edson's Classic Teak Yacht Wheel is the true original! In production for over 125 years, this is a wheel that belongs on any classic yacht or stately passage-maker. Handcrafted to the highest offshore-quality standards, and will provide years...

MSRP:

Was:

Now: $4,891.00
Chain & Wire Kit - 2B2D9 (77200)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $431.00

Add to Cart
Quadrant

Edson’s Quadrants are made from cast Manganese Bronze or 356-T6 heat-treated Aluminum. Available in 8” through 36” radius sizes, the Edson Quadrant is effective whether mounted fore or aft of the rudderpost. The quadrants are machined...
Compass Light Wire - 10' Length

Non-magnetic tinned, stranded copper wire. For new installations or re-wiring an existing compass. Have some extra on board. 10' length.

MSRP:

Was:

Now: $39.00

Add to Cart
Stainless Steel Hinge

Edson’s Teak and Poly Drop Leaf Tables use a Stainless Steel Hinges that attached the leaves of the table to the center table. Edson's 960-A-2097 Stainless Steel Hinges will replace any old, broken or lost Hinges on an Edson...

MSRP:

Was:

Now: $36.00

Add to Cart

Shop