Special Ops ComfortGrip PowerWheel Edson's Special Ops ComfortGrip PowerWheel, with its rugged durable matte black powder coat finish, the Special Ops PowerWheel is ideal for a reflection-killing blacked-out upper helm installation, a custom flats skiff in the Florida Keys, or a center... MSRP: Was: Now: $692.00 - $831.00 Choose Options
Polished Stainless Steel ComfortGrip PowerWheel The perfect combination of durability, good looks and soft feel! Edson’s ComfortGrip PowerWheels feature a unique rubber finger grip insert that provides precise control and ultimate comfort. And with the optional Pro-Series or... MSRP: Was: Now: $588.00 - $738.00 Choose Options
Teak and Stainless PowerWheel At the helm, the world is in your hands. For those looking for the absolute best place to put their hands, Edson is delighted to introduce our new 13" teak and stainless PowerWheel. By popular demand, we met the challenge of joining our iconic... MSRP: Was: Now: $4,300.00 Choose Options
Carbon Fiber PowerKnob Finally available on its own - Edson's carbon fiber PowerKnob. Beautifully molded in real carbon fiber, spinning on the same dual-race Delrin bearings as the rest of our PowerKnobs. Supplied with mounting hardware for both direct mounting. MSRP: Was: Now: $298.00 Add to Cart
Teak and Carbon PowerWheel At the helm, the world is in your hands. For those looking for the absolute best place to put their hands, Edson is delighted to introduce our new 13" teak and carbon PowerWheel. The timeless look of teak meets the cutting-edge beauty of carbon... MSRP: Was: Now: $4,500.00 Choose Options
Clip for Wheel Storage Device Replacement clip for straight and tapered wheel storage device. MSRP: Was: Now: $13.00 Add to Cart
EC3 - Elite Carbon 3-Spoke - 13-inch PowerWheel Edson’s 13” Elite Carbon 3-Spoke PowerWheel is crafted from genuine high-modulus carbon fiber and features the iconic Edson ComfortGrip and your choice of either our Carbon Fiber or Special-Ops ComfortGrip PowerKnob. A lightweight wheel with... MSRP: Was: Now: $2,325.00 - $2,365.00 Choose Options
Starlink Mobility Rail Mount Edson's Starlink Mobility Rail Mount lets you mount the new Starlink Mobility antenna to any railing between 1" and 1.25" in diameter. The clamp is investment cast 316 stainless for a lifetime of beautiful secure holding, while the stalk and base are... MSRP: Was: Now: $265.00 Add to Cart
Starlink HP Wedge Mount with Rail Mounting Hardware Edson's Starlink HP Base Plate replaces the Starlink antenna base plate and lets you mount a Starlink HP antenna directly to any railing between 1" and 1.25" diameter using Edson's secure Clamp-On Rail Mounts (part # 861-100-125). Starlink base is... MSRP: Was: Now: $265.00 Add to Cart
Avalon Pedestal w/Engine Controls Edson's new Pedestal pedestal brings modern looks and display convenience to boats of all vintages. Using Edson's 6" on-center hole spacing and the same footprint as Edson's Vision-series pedestals, the Pedestal has a larger, lower display console with a... MSRP: Was: Now: $2,475.00
Double Flat Sheave Assembly - 4" Sheaves Double flat sheave housing with two 4" sheaves. Ideal for 3/16" wire and 6mm Dyneema. If you are replacing a worn sheave pin in an older double flat housing please call Edson for availabilty of double flat sheave pins. (508) 995-9711 MSRP: Was: Now: $338.00 Add to Cart
Mounting Plate - Radar - Furuno, Geonav, Si-Tex Compatible with electronics listed below. SiTex 2kw, 4kw Radar Domes (T-2041, MDS-9, MDS-8, MDS-1, T-941, T-921, T-761, T-760). Furuno 2kw, 4kw Radars (15", 18”, 19” and 24" Domes and 3.5’ & 4' Open... MSRP: Was: Now: $158.00 Add to Cart
Aft Angled Vision Mounts - 6", 12", 18", 24", 36" Edson's aft angled mounts accomodate closed dome radars for a simple, attractive, and secure solution. Aft raked 30° Powder coated aluminum Optional light arm Optional antenna mounting wing Not for open array radars - please see heavy duty... MSRP: Was: Now: $322.00 - $782.00 Choose Options
Starlink HP Base Plate Edson's Starlink HP Base Plate replaces the Starlink antenna base plate and lets you mount a Starlink HP antenna directly to any Edson Vision mount for a seamless and integrated look. Constructed of durable powder coated aluminum, it will securely hold... MSRP: Was: Now: $215.00 Add to Cart
Edson Sticker The edson sticker will replace any worn or lost stickers that are found on Edson pedestals and mounts. UV resistant to hold up out on the water. Dimensions: 1.375"x3" MSRP: Was: Now: $5.00 Add to Cart
Dyneema and Chain Kit Many boat owners prefer Dyneema line over 7x19 wire since it runs well over sheaves, is unaffected by salt, is much stronger than wire of similar diameter, and is often much easier to install in tight quarters. Instead of cable clamps which can be hard... MSRP: Was: Now: $269.00 Choose Options
Carbonautica Carbon Sport Wheels The ultimate race wheel, masterfully constructed to highlight carbon's beauty and Carbonautica's expert workmanship, protected by a durable UV protecting clear finish. Light weight and high stiffness minimize flywheel effect in twin-wheel applications...
Carbonautica GFC Sport Wheels Beautifully finished in durable glass black or white, Carbonautica's composite wheels will drop weight and add style and performance to any boat. Light weight and high stiffness minimize flywheel effect in twin-wheel applications and maximize helm feel... MSRP: Was: Now: $906.00 - $2,710.00
Vision Instrument Housing - 2 Instrument 2 instrument housing suitable for mounting on any brand pedestal guard. If this is not a replacement for an original mount it requires 2 mounting clamps sold separately (Edson part # 861-100-125) with adapters to work on guard pipes from 1" to 1.25"... MSRP: Was: Now: $150.00 Add to Cart
Vision Instrument Housing Extra Large Extra large single instrument housing suitable for mounting on any brand pedestal guard. If this is not a replacement for an original mount it requires 2 mounting clamps sold separately (Edson part # 861-100-125) with adapters to work on guard pipes from... MSRP: Was: Now: $150.00 Add to Cart
Vision Instrument Housing - Large Instrument Large instrument housing suitable for mounting on any brand pedestal guard. If this is not a replacement for an original mount it requires 2 mounting clamps sold separately (Edson part # 861-100-125) with adapters to work on guard pipes from 1" to 1.25"... MSRP: Was: Now: $150.00 Add to Cart
Vision Instrument Housing - 4 Instrument 4 instrument housing suitable for mounting on any brand pedestal guard. If this is not a replacement for an original mount it requires 2 mounting clamps sold separately (Edson part # 861-100-125) with adapters to work on guard pipes from 1" to 1.25"... MSRP: Was: Now: $150.00 Add to Cart