Products - Page 9

Steering hardware, wheels, accessories, electronic mounts, and pumps highlight what Edson has to offer in this complete catalog of products.

Sailboat Steering Systems & Steering Wheels

Sailboat Pedestal & Cockpit Accessories

Power Boat Steering Wheels & PowerKnobs

Electronics Mounting Systems

Marine Accessories for Power Boats and Sailboats

Marine Manual Pumps for Power Boats & Sailboats

Conduit End Fitting for 3/4" Conduit

MSRP:

Was:

Now: $48.00

Add to Cart
Chain & Wire Kit - 2S15B22 (77107)

MSRP:

Was:

Now: $382.00

Add to Cart
Bronze Hub for 28-inch to 34-inch Dia. Wheels

MSRP:

Was:

Now: $829.00

Add to Cart
36-inch Classic Teak Yacht Wheel with 1-inch Straight Hub

MSRP:

Was:

Now: $4,127.00
408 Needle Bearing Shelf Steerer - 10 Tooth Sprocket - Tapered Shaft (With Brake)

MSRP:

Was:

Now: $1,205.00
418 Bulkhead Steerer - 11 Tooth Sprocket - Tapered Shaft (Less Brake)

MSRP:

Was:

Now: $996.00
420 Bulkhead Steerer - 11 Tooth Sprocket - Tapered Shaft (Less Brake)

MSRP:

Was:

Now: $733.00
402 Classic Series Pedestal - 11 Tooth Sprocket - Straight Shaft

MSRP:

Was:

Now: $2,577.00
Needle Bearing 1"

MSRP:

Was:

Now: $60.00

Add to Cart
Brake Knob & Shaft Assembly for #420 Steerers

MSRP:

Was:

Now: $143.00

Add to Cart
Chain & Wire Kit - 2S2B7 (77108)

MSRP:

Was:

Now: $299.00

Add to Cart
Brake Kit for 336 & 402 Pedestals with Thru Shaft Brake

MSRP:

Was:

Now: $102.00

Add to Cart
36” Aft Angled Vision Mount (68050)

MSRP:

Was:

Now: $782.00

Add to Cart
Ritchie Weather Shield

MSRP:

Was:

Now: $51.00

Add to Cart
Pedestal Guard Kit - 58" Angled - 8" Top Plate

MSRP:

Was:

Now: $632.00

Add to Cart
Engine Control Cable - 33 Series Cable - 14'

MSRP:

Was:

Now: $54.00

Add to Cart
10” Clutch Lever with Black Knob

MSRP:

Was:

Now: $60.00

Add to Cart
Single Lever Engine Control for Edson Pedestal #336 with 58" Offset Guard

MSRP:

Was:

Now: $1,615.00

Add to Cart
Console Table Mounting Bracket

MSRP:

Was:

Now: $78.00

Add to Cart
Brake Knob & Shaft Assembly for #336 Pedestal with Tapered Shaft

MSRP:

Was:

Now: $143.00

Add to Cart
Needle Bearing 1-1/8"

MSRP:

Was:

Now: $58.00

Add to Cart
8" Aluminum Sheave with Needle Bearings (ONLY)

MSRP:

Was:

Now: $344.00

Add to Cart
Flat Bronze Sheave Assembly - 6" Aluminum Sheave

MSRP:

Was:

Now: $351.00

Add to Cart
Single Upright Aluminum Sheave Assembly - 12" Sheave

MSRP:

Was:

Now: $1,495.00

Add to Cart

Conduit End Fitting for 3/4" Conduit

Edson’s #854-250 Conduit End Fittings are designed to fit Edson's #853-250 3/4" Conduit. Two fittings are required for each length of conduit. #854-250 fittings are molded in white Celcon and have an end fitting thread size of ...

MSRP:

Was:

Now: $48.00

Add to Cart
Chain & Wire Kit - 2S15B22 (77107)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink...

MSRP:

Was:

Now: $382.00

Add to Cart
Bronze Hub for 28-inch to 34-inch Dia. Wheels

With Edson's Wheel Bronze Wheel Hub for 28”-34” Diameter Wheels you can make your own traditional mahogany or teak wheels! Using a two piece design, it allows you to assemble your wheel easily. Bronze Hub 667BR-4 has a outside diameter...

MSRP:

Was:

Now: $829.00

Add to Cart
36-inch Classic Teak Yacht Wheel with 1-inch Straight Hub

Edson's Classic Teak Yacht Wheel is the true original! In production for over 125 years, this is a wheel that belongs on any classic yacht or stately passage-maker. Handcrafted to the highest offshore-quality standards, and will provide years...

MSRP:

Was:

Now: $4,127.00
408 Needle Bearing Shelf Steerer - 10 Tooth Sprocket - Tapered Shaft (With Brake)

Edson’s Needle Bearing Shelf Steerers are designed to provide precise steering control for larger boats. They are highly desirable due to their dependability, super sensitive “feel” and friction-free performance. Designed to be...

MSRP:

Was:

Now: $1,205.00
418 Bulkhead Steerer - 11 Tooth Sprocket - Tapered Shaft (Less Brake)

Edson's 418 Bulkhead Steerer is lightweight, versatile and rugged. For use on performance and cruising boats alike. Edson’s Bulkhead Steerers feature Stainless Steel Needle Bearings to reduce friction, all stainless construction and the ability...

MSRP:

Was:

Now: $996.00
420 Bulkhead Steerer - 11 Tooth Sprocket - Tapered Shaft (Less Brake)

Designed for boats with built-in pedestal consoles, Edson’s new Bulkhead Steerer features easy installation, Edson’s super-sensitive Stainless Needle Bearings, a Thru-Shaft Wheel Brake, all-stainless construction and the ability to...

MSRP:

Was:

Now: $733.00
402 Classic Series Pedestal - 11 Tooth Sprocket - Straight Shaft

Edson's Classic Series Pedestals allow for great space within the cockpit. Edson's #402-6-211S Pedestal has an 8" top diameter and features a convenient thru-shaft brake. Thanks to additional reinforcement and the addition of a third steerer shaft...

MSRP:

Was:

Now: $2,577.00
Needle Bearing 1"

Edson's Needle Bearing (960-A-140-1) is used in different steerers like the 418 and 420 bulkhead steerers. (Sold Individually) Specifications: Needle Bearing 1" long – Stainless Fits 1” Shafts

MSRP:

Was:

Now: $60.00

Add to Cart
Brake Knob & Shaft Assembly for #420 Steerers

For #420 Steerers with a Through Shaft Brake For Standard A=1-5/8" with standard Edson Destroyer Wheel. If you do not have an Edson Destroyer Wheel and your wheel hub is thicker than 1" please contact Edson's customer service team at info@edsonintl...

MSRP:

Was:

Now: $143.00

Add to Cart
Chain & Wire Kit - 2S2B7 (77108)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials. One length of roller chain and two lengths of wire are assembled with the connections between wire and chain covered in clear shrink plastic...

MSRP:

Was:

Now: $299.00

Add to Cart
Brake Kit for 336 & 402 Pedestals with Thru Shaft Brake

Just like your car, your boat’s wheel brake needs periodic relining. This kit includes all you need to make your brake work like new again. #316-336-402-TSB Brake Maintenance Kit includes: (1) Brake Collar (960-A-1793) (1)...

MSRP:

Was:

Now: $102.00

Add to Cart
36” Aft Angled Vision Mount (68050)

Edson's Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solutions to your electronics mounting requirements. Edson's 36” Aft Angle Vision Mount Key Features: 36-inches in hight Aft raked 30...

MSRP:

Was:

Now: $782.00

Add to Cart
Ritchie Weather Shield

Edson recommends the use of the Ritchie Weather Shield with the installation of any Binnacle Mount Compass on Edson 335 & 336 Pedestals. The weather shield helps prevent water infiltration into the pedestal or below decks through the pedestal

MSRP:

Was:

Now: $51.00

Add to Cart
Pedestal Guard Kit - 58" Angled - 8" Top Plate

Edson's Angled Pedestal Guard Kit gives you extra room to install Instrument Housings, Radar Pods or multiple displays while the new angle increases their visibility.Edson Pedestal Guard Kit includes Stainless Guard Pipe, Top Plate and Mounting Feet...

MSRP:

Was:

Now: $632.00

Add to Cart
Engine Control Cable - 33 Series Cable - 14'

The proper engine control cables will have a dramatic effect on the performance of your engine control. Edson carries only premium high-efficiency cables that feature a coiled inner core that can take bends much better than solid core cables. 33 Series...

MSRP:

Was:

Now: $54.00

Add to Cart
10” Clutch Lever with Black Knob

Edson's replacement 10” Clutch Lever with Black Knob is for #751ST Engine Control. Also used to extend clutch handle to avoid hitting wheel mounted autopilot.

MSRP:

Was:

Now: $60.00

Add to Cart
Single Lever Engine Control for Edson Pedestal #336 with 58" Offset Guard

Edson’s Single Lever Engine Control for Edson Pedestal #336 with 58" Offset Guard provides simple, safe, one-handed operation while maneuvering your boat under power. Mounted on the Pedestal with the 58" Offset 1-1⁄8” diameter...

MSRP:

Was:

Now: $1,615.00

Add to Cart
Console Table Mounting Bracket

Edson’s Teak and Poly Drop Leaf and Luncheon Tables use a Console Table Mounting Bracket that attaches to the Pedestal/Console allowing the Hinge pin to secure the table. Edson's 960-B-1208 Stainless Steel Hinge Pin will...

MSRP:

Was:

Now: $78.00

Add to Cart
Brake Knob & Shaft Assembly for #336 Pedestal with Tapered Shaft

For #336 Pedestal with Through Shaft Brake and Tapered shaft. For Standard A=1-5/8" with standard Edson Destroyer Wheel.

MSRP:

Was:

Now: $143.00

Add to Cart
Needle Bearing 1-1/8"

Edson's Needle Bearing (960-A-140-1.1) is designed for Edson's 335 Pedestals (Side Brake Model) & Edson's 336 Pedestal (Through Shaft Brake Model). (Sold Individually) Specifications: Needle Bearing 1-1/8" long – Stainless...

MSRP:

Was:

Now: $58.00

Add to Cart
8" Aluminum Sheave with Needle Bearings (ONLY)

Edson’s Sheaves may be the answer in many areas of custom boat building, not only for steering but also for centerboards, custom deck hardware, or remote actuators, such as emergency shut off valves and CO2 systems. Great care should be...

MSRP:

Was:

Now: $344.00

Add to Cart
Flat Bronze Sheave Assembly - 6" Aluminum Sheave

Edson’s Flat Sheave Assembly will allow you to turn steering cable around a sheave in tight areas where vertical assemblies normally wouldn't fit. Constructed of anodized Aluminum sheaves and a Bronze housing, it is designed to be...

MSRP:

Was:

Now: $351.00

Add to Cart
Single Upright Aluminum Sheave Assembly - 12" Sheave

Edson’s Single Upright Aluminum Sheave Assembly with a 12" Sheave are specially designed for use in wire rope steering systems for sailboats. The Aluminum Sheaves are ideal for the performance boat that requires sensitive, lightweight steering...

MSRP:

Was:

Now: $1,495.00

Add to Cart

Shop